Leaderboard

Won’t find this info on FB- lol. I worked on a 72 thru Covid . The guy texts me yesterday that he has no rear brakes . I put all new SS lines in his car and had to clean/ rebuild his brake switch valve . I’ve had the weirdest stuff with his brakes . The O rings failed on the brake switch and fluid was forced from one side to the other back up into the MC . Now his rear brakes don’t work - so after reading this I assume it’s that proportioning valve . I haven’t laid hands on it yet . Looks like I have good reference material here . Wish me luck

The ad was produced for Nissan Canada to celebrate the 60th anniversary of their entry into the Canadian automotive market. Stunt driving was performed by Kiwi rallycross driver Rhys Millen (son of Rod, nephew of Steve), using the airport at Lillooet, British Columbia for an action shot that was then blended into the primary road footage (shot on a nearby highway). There's a short feature on the video shoot available on Facebook... https://www.facebook.com/nissancanada/videos/781763657583093/ The actual video can be found on the landing page of Nissan Canada's consumer website... www.nissan.ca (scroll down on the landing page to find the video). I don't think it's available on YouTube yet. Nissan Canada's corporate media website has some nice feature articles and photos built around the 60th anniversary celebration... Official Canada NewsroomNissan Celebrates 60 Years of Innovation and Excellence i...Nissan Canada Inc. is proud to celebrate its 60th anniversary, marking six decades of innovation, growth, and commitment to the Canadian market.

Amazing what hides behind layers of metal….those repairs look nice. What kind of rotation device is that? I really like that.

@Ellison Brooks Another one brought here to espouse the benefits of Seafaom. Powerful stuff! Great for training and verification. Good luck! What brand of car do you specialize in? The four-wheeled kind or three?

Thanks for the prompt. I have been meaning to update the thread here but seem to have gotten side-tracked. The metal work has been completed on the body and it is now at the body shop. It has been there for about 3 weeks now and work on the underside has already been started. Carlos said the underside should be finished by the end of this week. He estimates that the body work and paint will be complete sometime in December. Would be nice to get this back before Christmas. There was quite a bit of metal work to do as you can see from the pictures below. The battery area was pretty bad as usual, as well as the floors. There were a number of smaller areas that were rusted through, and Larry did a good job filling and/or patching those. I wanted to make sure everything was very structurally sound and that all hidden rust areas were addressed. That being said, I am glad that part of the job has been completed. It is nice to see the body work started. The underside is looking better already. Carlos (the bodyshop/paint guy) stopped by my place and took a number of pictures of 2614 to see how the frame rails and other welded on parts were finished i.e no seam sealer. He also brought a paint camera and took pictures of the car color inside the door jam for color reference. I told him the color was the 920 Safari Gold per Nissan. I asked him to let me know how the colors line up. With 55 years of age, I am curious if the color on 2614 has darkened or developed a patina over time. Carlos has his own mixing set-up so he said that he will set me up with color samples prior to paint. In the mean time, I have been accumulating parts but not much else other than inspecting the body progress on a bi-weekly basis. However, now that my summer projects are nearly complete, I will get back to work on 0042.

Buyer beware, anytime a seller claims it is a factory correct restoration it makes you wonder which factory! Looking at a lot of the details on the S30 cars they have in their museum they are far from factory correct, nice and shiny but Nissan never built them to this level. Also quite a few important details on the early cars are different to how they were built. I'm no expert but if I can spot the difference how can the so called experts involved advising S30 have missed them?

Wow, this is pretty cool and it's not April 1st. This should be a fun auction to watch. A note on the blue car that appears to be a pre 21000 car. The map light is hooded which is the same as my early car and also @Johnz1971 car that we discussed here. 1970 Wiring Diagram - Page 9 - Electrical - Classic Zcar Community

This has been discussed on other forums, and my personal take is that there can be no such thing as a 'replacement bodyshell' for these cars. Replacing the bodyshell is replacing the car. There's no continuity. It would make a whole new thing.

It's a remarkable bit of production. Kudo's to Nissan Canada for financing the project, and to the Canadian ad agency for designing and realizing a killer advert that properly and expertly recognizes the significance of the Z's role in creating Nissan's worldwide market presence (notwithstanding Nissan's Japan's efforts throughout the 1970's and 1980's to throw it all away). Additional kudos to Nissan Canada for providing its corporate facilities in Mississauga, Ontario as the venue for the annual show-and-shine meeting hosted b y the Ontario Z-Car Association (look it up). I'm really proud of Canada's (continuing) role in supporting the Z legacy. Here on CZCC, I would draw your attention to the importance of our Canadian members in making this site such a valuable Z resource. Those who come immediately to mind are 240/260/280Z (who's written a complete library of Z rebuild articles), along with Grannyknot, CanTechZ, Wheee and zKars (some of the best restoration build contributors that this site has enjoyed). I should also mention that, for years (dating back to 1994), Charlie Osborne at Zedd Findings in Kingston, Ontario, was (I believe) the only source worldwide for decent replacement Z floor panels and front frame rails.

I wonder if it’s within factory specs.

While I do have the special tool to open the booster, I also used Powerbrakeexchange. I live in WA and just dropped it off there. Traded in some of my cores for a discount as well. Call and ask then if he still has my cores, he can rebuild that and would likely just charge more for you not sending in a core. If that works for you.