looking at buying the following

https://zcardepot.com/products/header-exhaust-ceramic-coated-240z-260z-280z-70-76?variant=19276147654769

 

Any recommendations on the muffler? 

I bought the MSA kit, cylinder head to rear bumper. It's $590 but we get 10% off with your czcc member number. I really like it too.

Scroll down after the header and see the premium 2.5 exhaust.

If you call them sometimes you get even better price or they'll tell you when it's gonna be on sale.

 

https://www.thezstore.com/page/TZS/PROD/classic19d/15-6012CH

Edited October 7, 20205 yr by siteunseen

Consider adding a resonator if you do.  Some do not like the drone in their system. 

dang. just called them. on the MSA, wait time in the months.... 

should the resonator go inside the 2.5" pipe or on the outer side? I would assume outer which means resonator needs be slightly bigger than 2.5? yes?

I put a magnaflow muffler and a 2.5" pipe on my 280 along with a flow thru resonator.  I'm happy with it.

Edit to say that the resonator on mine is about halfway between the muffler and the connection to the header.  Just where ever it will tuck in underneath.

 

Edited October 7, 20205 yr by gwri8

1 hour ago, 7tooZ said:

Consider adding a resonator if you do.  Some do not like the drone in their system. 

My 280 needed a resonator. Installed by a local muffler shop for maybe $50. 

240 screams bloody murder like a crotch rocket motorcycle. No resonator needed on the 2.4 for me.

Edited October 8, 20205 yr by siteunseen

If you have a stock system don't throw away the head pipe, hard to find for a 280z, someone looking to revert back may be in need of one.

Was the MSA wait time for both the 3/2 and 6/1 ceramic coated headers? You ref'd the 3/2 from ZCarDepot. I did the 6/1 from MSA - MagnaFlow resonator in the tunnel and MagnaFlow muffler at the end. I then just had the exhaust place build the 2.5" rest of it. Not too aggressive for this old fart. 

On 10/8/2020 at 10:55 PM, w3wilkes said:

Was the MSA wait time for both the 3/2 and 6/1 ceramic coated headers? You ref'd the 3/2 from ZCarDepot. I did the 6/1 from MSA - MagnaFlow resonator in the tunnel and MagnaFlow muffler at the end. I then just had the exhaust place build the 2.5" rest of it. Not too aggressive for this old fart. 

I don't suppose you have a recording of what it sounds like, I have the 6-1 and was considering MagnaFlow. 

Sorry, but I don't. I am quite pleased with it though. You can hear it, but it's not too loud.

I ordered one of these

the blemish (a small welded tab) does not really make a difference to me, but $100 is $100.

 

I like the way they look, should fit your 2.5" as well.