Mint '71 240Z - More Fun Coming to BaT

[26th-Z]

10 hours ago, zspert said:

I finally had a chance to dig through the archives for those sound deadener part numbers. they are, or were, G5930-89904 and G5930-89902. I last bought any 9/07. I can't remember which is thicker (cargo area)

89902 is for the floor and 89904 is for the "package tray".  Both still available.

Edited February 18, 2020 by 26th-Z

[26th-Z]

Agreed that the stickers were factory applied.  The market designation was part of the build sheet, no?

[240260280]

HLS30-00187

[inline6]

1 hour ago, 26th-Z said:

89902 is for the floor and 89904 is for the "package tray".  Both still available.

 

Actually, I believe G5930-89902 is discontinued.  And though I was able to buy G5930-89904, it appears to be about .060" in thickness, and what I took out of my 1971 from the tunnel (floor "mat" was already gone) is about .090".  Package shelf appears to be about .090" as well.  It would be nice to confirm original thickness of the pieces for the floor and the tunnel, as well as the rear deck, for US cars that had all three.  Going to put this in another thread.

 

 

[christoffel]

33 minutes ago, 240260280 said:

HLS30-00187

Great, than this is solved! Same as on my #672

is #187 drivable now?? 

[240260280]

187 circa 2017 pulled from the Hoover bag ? Looks nice!

Edited February 19, 2020 by 240260280

[SpeedRoo]

1 hour ago, inline6 said:

Actually, I believe G5930-89902 is discontinued.  And though I was able to buy G5930-89904, it appears to be about .060" in thickness, and what I took out of my 1971 from the tunnel (floor "mat" was already gone) is about .090".  Package shelf appears to be about .090" as well.  It would be nice to confirm original thickness of the pieces for the floor and the tunnel, as well as the rear deck, for US cars that had all three.  Going to put this in another thread.

 

 

How many of each part number are required for a car. Will 1 box of each be enough?

[SpeedRoo]

19 hours ago, 240260280 said:

 

The wording seems to be for an automatic in 1971.

It says manual at the bottom so how can it be for an automatic?

Edited February 18, 2020 by SpeedRoo

[240260280]

2 hours ago, SpeedRoo said:

It says manual at the bottom so how can it be for an automatic?

The word "neutral" is used so it confused me.

[inline6]

8 hours ago, SpeedRoo said:

How many of each part number are required for a car. Will 1 box of each be enough?

You get two sheets in the box with an order quantity of 1 of part number G5930-89904.  Each is about 3 feet square I think.  One box is not enough to do the full car, and maybe not even both floors in front and under the seats.  And again, it doesn't look to be the right thickness.  

[zspert]

Yes, model, therefore, market is indicated on a build sheet I have.

[hiyabrad]

13 hours ago, 26th-Z said:

Agreed that the stickers were factory applied.  The market designation was part of the build sheet, no?

Can you post the build sheet?