Mike,

Attached is a picture of the cover that controls the seat back mechanism. It is black plastic. I need one for 11/75 - 76 -280Z. It is different than 77 but could be same as 240 type II seats.

I need one for the passenger side. If any one knows where I can get one let me know.

Thanks.

I second the request for 75 and 76 rubber bumper pieces.

How about the white plastic male / female wiring harness connectors? They discolor and become brittle.

How about the white plastic male / female wiring harness connectors? They discolor and become brittle.

Check out Banzai Motorworks, Banzai Motorworks

Check out Banzai Motorworks, Banzai Motorworks

Or Vintage Connections...

thanks for the leads!

Hi Mike, We have been discussing the plastic inner fender panel for the 280Z in a thread started by GC240Z.

I think they would be a good option for reproduction.

See thread

http://www.classiczcars.com/forums/body-paint-s30/50408-280z-plastic-inner-fender-question.html

Chas

i'd be in for a set of tail light trim an am radio face plate... as well as a set of "DATSUN" thresholds and a new early gas cap...

240z heater fan knob

240z heater fan knob screw

Mike,

Attached is a picture of the cover that controls the seat back mechanism. It is black plastic. I need one for 11/75 - 76 -280Z. It is different than 77 but could be same as 240 type II seats.

[ATTACH=CONFIG]63953[/ATTACH]

I need one for the passenger side. If any one knows where I can get one let me know.

Thanks.

Hi Michael,

Mike McGinnis from Banzai Motorworks already has a reproduction seat reclining mechanism cover for the 240Z's. I do not know if the covers changed for the 260 and 280.

So... 9teen7t240zwhat ever happened to having 240z Taillight bezels?

I had to make my own:

https://sites.google.com/a/thecomputerrehab.com/260z/Interior/heater-plumbing