mdbrandy's Content - Page 22 - Classic Z Car Club Skip to content

mdbrandy

Community Member
  • Joined

  • Last visited

Everything posted by mdbrandy

  1. I haven't even seen braided radiator hoses on e-bay or anywhere else. I have braided heater hoses and several other braided hoses now, but not the big ones. I have time to keep watching though... To plate clamps, I'd have to have some first. I keep my eye out for wire clamps, and I have some, but I haven't made a list of what I need, so I don't really know how close I am to having a "set".
  2. I found the following definition on the web: "Faux is a French word used to describe something made to resemble something else. The original French word means false, fake, imitation or artificial. Faux marble looks like marble. Faux bois looks like wood. Faux porphyry looks like stone. "
  3. Welcome, Mike. Just looked up your car on zhome.com - looks like you've got your original engine. How original is the rest of your car? Several of us on this board are restoring/refreshing very early cars (mine is #215), and like to compare original bits, since the very early cars often have some unique pieces. Love to see what you've got!:classic:
  4. mdbrandy replied to Fun_in_my_z's topic in Open Chit Chat
    Bob & Tom fan?
  5. The Z's didn't use an O2 sensor in the FI system until the '79 280ZX.
  6. If he does, I'd LOVE to know about it. Thanks.
  7. Your url is wrong. It's Sleepy.mpg, not .mpeg.
  8. Where did you get a rounded throttle knob! I'd like to have one to go with my round choke knob....
  9. Ah - I hadn't noticed that. At least it's protection from rain through the windshield. Don't know how much good it'd do to protect a primer'd surface over time, though. Probably get condensation under that non-breathing plastic anyway.
  10. No problem. It does have a little "revised" note. I don't know if that statement was there in the original or not. Oh well, doesn't matter :classic: . I thought it was interesting too to note that the car doesn't have a windshield. And is sitting out in the rain!
  11. Really? So what does "It does run and drive, however" mean to you? I suppose it could have run before he took it apart again...
  12. I never contact buyers, but I've contacted several sellers advising them of errors in their "Z" parts listings. Just this week I got a nice note back thanking me on one, and they corrected the listing. That's happened several times. A few times I've gotten nothing back, but more often than not the sellers are appreciative. I generally pose the correction as a question, with information showing why I'm "confused". Maybe that helps, or maybe I've just been lucky.
  13. I wonder how he knows how much power it has...I can't tell where it's taking it's induction from - where the airflow meter usually is on an injected engine, there is nothing there. I'd assume it isn't running given the picture...
  14. If you want new ones, you can try Chloe at www.midwestz.com. She has supplied quite a bit of hardware to various people in the past...
  15. No problem. I assumed. I watched that one, and if I could have been there at close, I might have sniped at it too, but I probably wouldn't have paid more than it went for. Since I couldn't be there at close, I let it go. I wasn't too impressed with it being "sandblasted" either. The pics weren't good enough to tell if they had damaged it with the sand or not. Even fine sand can eat Aluminum quickly...
  16. I agree. If I can be at the computer when an item ends, I snipe. This has two effects: since I bid at the last second, I put in the max value I am willing to pay. Thus, if I am willing to pay more than anyone else, I win. If not, then it keeps me from doing anything stupid :stupid: by getting caught up and overbidding, since the auction is over before I can do it!
  17. Were you just bidding on that sandblasted one? It went pretty cheap ($41 ?). If you aren't going to snipe, you just need to enter your highest bid and hope it's more than anyone else is willing to pay. If he paid more than you were willing to pay, then it doesn't matter if he sniped you or not. (And no it wasn't me). Probably a reseller if he's bought 3 recently. I got sniped on a series I parts car fairly close to me recently by someone that was obviously a reseller. But he paid more than I was willing to, so...
  18. Make sure you pay attention to Daniel's advice. If your battery is internally shorted (it does happen), you'll never get it jumpstarted, even with a good starter and solenoid.
  19. However, the air flow meter does have fuel pump contacts that only allow the fuel pump to run when the engine is running after the ignition switch reaches the "ON" position. Thus, it sounds like something, maybe one of those relays sblake is talking about is causing the car to think that the ignition is "ON", and since the engine isn't running, the fuel pump won't either. Pushing on the airflow meter flap makes the car think it's running (by changing the fuel pump contacts in the airflow meter), and thus allows the fuel pump to run, and the car to start.
  20. According to the FI video I just watched this week by Kim Blough, there isn't an O2 sensor on the '78 280Z - there wasn't an O2 sensor until the ZX.
  21. Banzai Motoworks
  22. I noticed that when I checked the price after the auction. It went pretty high again - more than I would have paid, but I wondered what happened to you .
  23. True, it didn't. At the beginning of the thread, I was really just trying to find out who the e-bay member was. Mark
  24. Yes, I know that the one from last night was a hatch emblem. and the flying 240's (as I called them) are the ones with the round disks. You're right that the price wasn't too out of line, but it was for a used emblem, and I already have a full set of NOS emblems for my 240. And I have a lot of other things to buy and can't spend too much on collectibles versus usables... Have fun with your incognito bidding. :tapemouth

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.