Everything posted by mdbrandy
-
'toe in' on my rear tire problem
I believe this is what the guys have been talking about: http://www.zcarparts.com/store/merchant.mvc?Screen=PROD&Product_Code=23-4171&Category_Code=PSDC07A The bushing is off-center, and thus as you turn it, it moves the control arm attachment point around a little. Note: I've never used one.
-
Higher Compression, Harder the Start?
The later 1978 280Z has a 'gear reduction' starter. Is that classified as high-torque?
-
True or False
I can't answer your questions, but I do know that quoting percentages like this is just a way to inflate or deflate changes depending on what you're trying to prove. I remember someone arguing some years ago that around a recently constructed nuclear reactor, still births had increased by 66% the following year! What they didn't tell you was that the actual numbers went from 3 to 5. Of course, the year after that, there were none! Lies, damned lies, and statistics. I think that's somebody's saying...
-
Rally Clock for sale on Ebay
I give unknowledgeable sellers extra info when I see it too. I saw a speedometer there the other day that the guy didn't know what year it was from. Well, since it started at 20 mph, it was obviously from an early 240Z, so I told him that and he added the info to his add, as a "somebody told me" comment. The crazy thing went for over $50! Somebody must have wanted an early speedo.
-
280Z Videos! DRIFTING! Snow FUN! hehe
1) there is no way to tell from the videos that all of those houses are unoccupied. Many look like they are done, or close to it. He had info that we didn't have. 2) Yes, we probably did stupid things when we were young. That doesn't make them less stupid. 3) I wouldn't have wanted to be the guy with the camera either.
-
280Z Videos! DRIFTING! Snow FUN! hehe
That was pretty much my reaction. Since my middle kid was run over by a car when he was 5 right out in front of our house, after sledding out into the street, that kind of driving in a neighborhood doesn't do much for me. The car that got him wasn't even going fast. He's fine now, but the broken leg and chopper ride to Johns Hopkins wasn't much fun for any of us. Find an empty parking lot or something. :dead:
-
1977 280z Mpg
In the city, with my '78 and my foot generally well into the "carburator" (throttle-body :classic: ), I get 15-17 mpg. If I drive more sedately, it is closer to 19. And I think the beast needs to be tuned up a bit. I haven't done any real highway miles with it.
-
Easiest way to remove hardcore jute adhesive?
I used a putty knife and then acetone to clean up the residue.
-
engins
Is that the F54 block that I hear about from some of the power-makers? Or is that something different :cross-eye ?
-
engins
Well, that's true, but I was just trying to make the point that without the L24 or L26 marking, you wouldn't be able to tell them apart because the bore was the same. The L28 bore makes it at least distinguishable from the other two. And I've never actualy had a 260Z, so I'm only assuming it says L26 on the block . Of course, of you bored out the L24 block, then it would be the same as the L28, right? Except I gather that isn't a good idea...I assume due to internal wall thicknesses and webbing being different.
-
engins
Should be an L24 - 2400cc. If you look at the right side of the block at the top back, there should be two flat places, one with a four digit number, and one that says L24. If it says something other than L24, it could be L26 or L28, which would mean a block from a 260Z or 280Z, at 2600cc or 2800cc. These values are all rounded up slightly. Oh, and I think the L24 and L26 blocks are the same, and the extra displacement achieved through a change in the stroke - right engine experts?
-
What does water temp switch do?
There are several switches/sensors on the thermostat housing of fuel injected cars (75-78 280Z's). The temp switch and thermotime switch signal the fuel injection computer for various things and tell it what the engine temperature is so that the computer knows how to control the FI. Do you want to know exactly what the temp switch does, or just this info in general? I could look it up in my '78 manual if you need to know exactly what it does.
-
Floor replacement?
MSA sells those same floor pans and frame rails as their premium brand. Since you're in CA, you might want to see if it's cheaper to go through them, since the stuff from Zedd Findings comes from Canada, and has customs fees, etc. Charlie is a good guy to work with directly, though. He'll get the $$ either way, though . Mark
-
A Pillar Vinyl
-
Cat Bowling
144 in cat bowling. 3 strikes in a row!
-
Aviation Fuel
About half the gas stations here in Central Illinois sell "gasohol", which is up to 10% ethanol. It works fine, but you don't want to use it in an old fuel system, since the different solvent (ethanol) will dissolve the old varnish in your system and plug your filters. As long as you use it from the start (new car), no problem.
-
battery tray & inner fender parts needed
rzola has a battery tray on e-bay out of the '71 that he's parting out. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=40017&item=2457211987
-
Uh-oh, I smell gas...
You can't trust their online stuff for availability or price, either. Check out: http://www.zcarparts.com/store/merchant.mvc?Screen=PROD&Product_Code=11-3100&Category_Code=SFC01C and say Wow! a choke/hand throttle assembly like I've been wanting! But you call them, and it's NLA. They told me that they are pretty much transcribing their old, outdated catalog (2 years old now or more) onto the web. So don't get your hopes up.
-
Got Hot!
Metal fans only came on 70's and maybe early 71's. Unless you're doing a stock restore, you don't want them. They are heavy and tend to wear out the water pumps. A 73 would be a plastic fan anyway.
- I am now Z less
-
1978 280Z electrical gremlins
Oh, and for reference, the three listed by color and cross sectional area are: Black 1.25 mm2 (0.0019 in2) Green 0.5 mm2 (0.0008 in2) Brown 0.3 mm2 (0.0005 in2) They don't provide any resistance values to go with the area.
-
1978 280Z electrical gremlins
As long as the material is the same for each of the link wires, then the resistance of the wire will be proportional to the length and the cross sectional area (i.e., the resistance per unit length will be proportional to the area). They are color coded too, though.
-
1978 280Z electrical gremlins
I have the factory manual, and they seem to be rated in terms of the cross sectional area of the wire. There are three different sizes listed, and visually, this is by far the biggest one.
-
1978 280Z electrical gremlins
This one actually looks fine. Doesn't break apart, seems pretty solid. But wiggle it and it appears to have a small internal break. Bummer on the special order. I'll pull one off the wiring harness from my parts car and see if it works while I order new. Thanks.
-
1978 280Z electrical gremlins
Thanks Tomohawk. Looks like it is the fusible link. There is one maked "ACC", and when I wiggle it, the lights that are out flicker on and off, and when I put the continuity meter on it (off the car) and wiggle it, it varies between a few ohms to infinite resistance. So I need a new link. I see sets on e-bay all the time, and I'm sure Chloe can probably get them for me, but does anyone know if this is something you can get at the local auto parts store? Or even at Nissan?