siteunseen

The more I drink the more I think. I shoulda' drank more in elementary school. That thing is more zippy on account of the aluminium flywheel. The a/c fast idle connecting arm off the front carb is hitting the heat shield. I'll either have to cut it or the heat shield. More thoughts, more beer. 8^) Mowing grass is better than smoking it.

25 minutes at 2,000 rpm, finally! And it's got some snap to it. Exhaust was massive amount of air, no smoke either. 8^) It ran hot but not too far past the right leg of the M in TEMP. That's hot for mine too. I deleted all the stuff off the balance tube so I had to pop the plastic marble off the pedal. It wouldn't get lower than 2400 at first. I'll figure all that out later. It's Miller time now! I'm gonna get on my mower. Thanks for the help guys. As always I couldn't have done it without help from the forum. Cliff

Talked with Bruce at Ztherapy and Jeff G. I'm not drilling a hole in my thermostat yet. Wait to see what happens first.

I have a house and a 3 car garage with an apartment on top. I'm single and spend most of my time in the garage so I live back here and rent my house out. The renters pay my mortgage and homeowners insurance plus a little extra for my pocket. Luckily, fortunately or thank God according to my Mom, I quit all my evil ways in '06 and moved into the apartment and rented the house out. FBI moved in next door in '08. He keeps me from doing anything stupid again. My garage is the red circle and my rental is in front to the right. He lives to the left. It can be nerve racking but we're adults, he's on the property line not me.

Chilton's and Haynes are not very useful I've learned too. Thank Goodness for the internet!

Haaaahaaa ha! Alpha males are right even when they're wrong. I remember my outboard had a cavitation plate above the prop to keep from "spinning out" with air. I'm just coming in from being downstairs all day doing small stuff. I get zoned out on something simple and waste time. I'm going to have some cold refreshments and enjoy some solitude. My next door neighbor, 30 feet from my den to his, is gone to the beach for a week. Nice guy but he's a damn FBI agent and a serious one at that. Surround sound will be theater loud tonight! I'll read up in the morning on thermostat jiggle valves when I can sit down with my laptop. Smart phones kinda suck when researching. Thank you Zed Head. 8^)

What would it hurt to snip that little stopper off a thermostat? I feel like I need some flow before the thermostat opens. Is that dumb dumb thinking? I'm famous around these parts for that!

I point my ramps out to the side of the car on the rears when I'm under mine. I've put cement walking pavers under the ramps flat area for more height. Tried 4" solid cap blocks first but my floor jack wouldn't go high enough. I used a motorcycle jack I have to lower my transmission down then I couldn't get all that out from under my car! Slid it off the jack then drug it out from under the car. Learned the hard way that day.

Could you tell me whether or not I should drill a small hole into my thermostat other than the small one it has now? The one that has some type of lug hanging down and points away from the engine. Thank you for any advice. I filed my radiator this morning and clamped the over flow hose off then blew into the cap hole until my eyes started watering. And lucky me found a leak I never knew about before. The lower thermostat housing had a pin hole that leaked oh so slightly. I filled it with water resistant epoxy putty. I'm waiting for it to harden then will sand and file the excess off. Thanks again.

Here's that thread Mark's referring to,

I'd load onto my truck and carry it to a transmission shop. I had a local shop take two of mine and make one good one, new seals and gaskets when they put it back together. $100 charge, I gave him $125. That doesn't look good to me but maybe it's not that bad.

Here's Blue's friend George, Dr. 240Z, if you want to message him, http://www.classiczcars.com/profile/27035-dr-240z/?tab=activity About Dr. 240Z Rank Registered User Birthday12/23/1950 Profile Information LocationNew Brunswick Canada Real NameGeorge Findlay OccupationDentist (Retired) About My CarsHLS3018859 (red, std): Purchased on May 11, '71 inKitimat.BC. My first car. Recently refurbished with many thanks to CZCC member, 'Blue', without whose wisdom, resourcefulness and fortitude it would not be what is today.

I followed your directions from hybridz. 8^) Pretty funny ranting and raving from the famous chest pounder. Thank you!

That won't last long! I'd love to have it but am a few miles away.

Hell yeah. You have the car.

I've deleted the heater core and the carburetor coolant lines, temporarily for the heater core but permanent for the carbbies. Please let me know if I've missed something or screwed up somehow. Thanks, Cliff

I like those!

You're going to leave it that??? An Olympian son? Congratulations! More info. I'll take a guess and say swimming. You're tall and skinny and a speedster too. B^)

Well that's a first. Only 10 likes per day message. I'm happy to hear about your son and the 510s rebirth.

Quick update, FAILED. Another one is on the way. 8^)

So that's something I'll just have to live with I guess, turn the radio up some more. Now that I think about it I couldn't hear it until I had that resonator installed!

I'm going to "throw out" something here. My 280's bearing makes a slight whining noise when I'm in neutral and foot off the pedal so I'm guessing the bearing is slightly touching the fingers of the pressure plate? If I shorten the adjustable rod under the dash wouldn't that take the bearing off the fingers and stop the whining?

No dead horses ever to me. I'll kick something until I starve to death, maybe a Southern thing, hard headed. As for your guessing abilities,

Revisiting an old thread found using the "Search" box, and thanks to Mike for the quality search, this guy says dissolving black plastic with MEK will make a useable paste for console repairs which got me thinking about something that's already made up. So I've been reading about black ABS plastic pipe glue. Has anyone ever used this to repair a cracked console? Mine is cracked where the choke assembly was mounted. Thanks.

All the 20 amps were replaced and are the right length, comparing them to the old ones. I'm glad I changed them out too, there was a 30 in the mix. I haven't changed the 10s yet but after reading what you've posted about the AGCs I'm sure they will be okay. Thank you.