Zed Head

Just a thought, while things are apart - many/several of us have found machining grit in our various aftermarket hydraulic parts. Slave cylinders and both type of master cylinder (clutch or brake), along with just bad seals from the start. You might disassemble that MC and see how the seals and bore look. It's pretty easy to do. There are three seals, two to create pressure and one to keep the fluid in the cylinder if the back pressure seal leaks. So you can have an internal leak - pressure loss, no obvious fluid leakage - without having an external leak - obvious fluid leakage. Or, of course, just to be safe, you could replace it if you got it locally. Even if you do that though, disassembling and cleaning before installation is a good idea. Or, 2nd, you could just reassemble and see what happens.

They were probably going 10 mph. Just goes to show that, like that other post, a flashlight does not replace a headlight. Head-on golf cart crash. I assume that no alcohol was involved. It's a golf course. https://www.yahoo.com/sports/cristie-kerr-recalls-cart-accident-231611267.html I can’t remember whether I hit the steering wheel or not. Like I swear to God we were being careful. It was pitch black. No lights. There was a cart that was rounding the corner from the range and I could see that, because that cart had headlights and our cart did not,” she said. “I was using the flashlight to lead the way. We were going three-quarters of the speed. We were both out making sure we were on the path, and had to move over just a touch left to miss the other cart coming our direction. We just hit this thing smack on. “We were both thrown from the cart, and I just I can’t remember. I remember landing, I remember the impact, and — I’m sorry.”

Can't keep up, missed this one. Green. Looks pretty good. 4 days to go. No Reserve: 1971 Datsun 240Z L28 5-Speed https://bringatrailer.com/listing/1971-datsun-240z-162/

Here's some examples. Looks like Nissan had their stamping act together by the late 70's. Make sure the upper rivets touche the top of the N and D, and don't overlook the little 1 (edit - I found one with a 6. A new puzzle) in the bottom right corner. https://bringatrailer.com/listing/1977-datsun-280z-7/ https://bringatrailer.com/listing/1977-datsun-280z-7/ This one has a 6 though. https://bringatrailer.com/listing/1977-datsun-280z-47/

Another blue one. This one really is a 76. https://bringatrailer.com/listing/1976-datsun-280z-41/

I think you guys are right. I also realized another simple one after staring at those pictures. 240Z's only have one strut holding up the hatch lid, 280Z's have two. Well, that was fun. Somebody put a lot of work in to turning a 240Z in to, essentially, a 280Z. This is a 78 with the raised deck. And a 75 just to top it off. The 240Z style caps on the 280Z tall strut towers. With two hatch lid struts. https://bringatrailer.com/listing/1975-datsun-280z-26/

Found a 240Z shot. https://www.youtube.com/watch?v=3JgxSUpfICw

Maybe it is a 240Z. Still not good pictures. The angles are off. Need that shot from the back.

I studied the rear shock towers too but couldn't form a definitive thought. You'd have to see two bare sets side by side I think. I pasted the other shot down below. Maybe someone has a similar view of either a 240Z or 280Z? @grannyknot ? I found one, at least, but he likes to shoot from distance. Pasted below, down to the shell resto 240Z. Can't tell it looks like the tower has a bow in it while the blue one doesn't. Don't know!. But wait (after I wrote a bunch of junk below) isn't the distance from the top of the wheel well to the top of the tower longer in the blue car? Is that it!? The definitive?!?!? I pasted two pics at the end... Thank you grannyknot (of course, it could be an illusion, from my fevered mind). Darn it, just realized I'm looking at the back of one and the front of another. More searching... You can get in to some really complex "why/how" loops. Yesterday (I'm obsessed) I was thinking about the brackets for the magnet valves. Did the 240Z's have those same brackets? If not, how did they mount the magnet valves? Where is the engine bay plate, with the car number and engine number? Why did somebody remove it? Both are gone, 240Z or 280Z. Who knows, maybe it is a 240Z with a lot of effort in to installing 280Z parts. 280Z doors, 280Z tach (with wire from the negative post and resistor to run it), engine, EFI system (with computer, assumed, plus fuel pump plus larger fuel return line because the 240Z return line is too small for an EFI pump volume). Why move the two fusible link blocks over? They were really helpful until I showed the firewall VIN location.

That Beverly Hills Car Club that has the blue 1972 (1976) beater was on Gas Monkey Garage in the past, I think. I haven't heard back since I told them where to look to make sure the VIN was correct. They have a title so maybe they're going to pretend they don't know. https://www.beverlyhillscarclub.com/1972-datsun-240z-c-11820.htm

$30,000 is not enough for a super-modded 73. Reserve not met.

Did you tell him about the not-a-72 at Beverly Hills Car Club? I wouldn't buy any low numbers car without seeing the firewall stamp.

He doesn't know the big money is on BAT? Craigslist for #738? I feel ironic here... Gonna need to see that firewall stamp. And why are the rivet heads hidden?

Both pumping and bidding, or investing and collecting? Seems in the vein of "I paid a lot therefore everyone must pay a lot". Like the guys who jump on to the sales ads to make sure that nobody gets a good deal when somebody lists a car for a low price. Just something distasteful about it. But that's why I don't collect (invest) in old stuff.

And this guy, lsteppe4re, is interesting. He's pumping up the bid while bidding himself. Has to be an investor/collector. Got to keep those prices up. Or he just has money to blow.

The guy that left them is on BAT if someone wants to start a conversation.

So, build your car for the masses, or build the car for yourself? Let's get philosophical... The seller just bought the car in 2018. Wonder why they're selling already. If it's an investment then the round top change probably makes sense. It's a commercial item, you need to give the consumer what they want.

Maybe they work as they were supposed to. No reason to change if they do.

$24,000 for the nice orange 72. https://bringatrailer.com/listing/1972-datsun-240z-156/

Ouch. Don't let that get out of control. Good luck.

It's the wind. Seems simple enough. https://www.yahoo.com/news/infected-5-minutes-20-feet-192346911.html

So close. Try to miss your dog when you vomit. Or, actually, he'd probably enjoy the meal. Dogs will eat anything.

$12,000 for an average 260Z. Not bad. It's the red paint.

It wasn't a tooth! Sure it wasn't. Gohmert is a mask convert now, of course, but tooth little tooth late. https://www.yahoo.com/entertainment/rep-louie-gohmerts-speech-goes-014909870.html