Noddle

My '73 coupe has fixed belts, my 3 other four doors has retractable, '73, '75, '77 Nigel

Have you seen this http://www.watanabe.com.au/attachments/File/Nissan_matching_data.pdf I'm in the same boat, I have a month to decide if I'm going to spend a lot of money on wheels, I was looking at F:16-80 ±0 R 16-85 -6, I did want to go 15s , but getting tires in a decent width would be a issue, 16 have a lot more to choose from Nigel

Nice..

These are the King spring I use on the front, Nigel

try Repco or similar, that way you will get the right one to suit the 240K you may find the price not much different than what you would pay on ebay, maybe.. "Slave cylinder and the hose/wire? to join the slave cylinder to the master cylinder." It's a metal line from the master cylinder down to a a bracket near the stearing box, then a flex tube to the slave cylinder Nigel

Hi, Can you explain to me how this works, if I used http://jessestreeter.com/ Say I find something on Yahoo that I'm willing to pay 25,000.00 Yen (~$290) What is the process to get it to my door, and what are the extra cost over the purchase price Nigel

How much of a hassle is it to buy from Yahoo ?, I've always though of it, but have no idea how to go about it, and from what I have read, they will not send to a none Japan address Nigel

you should just put a link from http://www.skylinesaustralia.com back to here, as I would think more 240K owner live here than on skylines Australia Nigel

These are normal Datsun 240K tail lights, not worth anything in Australia, unless your is broken, the JDM tails lights are what we are all after, it's easy to see the difference if you compare them, Nigel

a RB30 flywheel will fit I believe

Yes the bit you put your foot on is, but I just cut it up with a grinder, drilled a extra hole for the clutch cylinder push rod, and bent it a little with a 18inch shifter to get the placement off the peddles. not very hard. Nigel

You can make a 'Auto Brake peddle" into a manual clutch peddle, I did it for my 2 door ages ago. Like this. Nigel

Can you let us know if it fits, and how much work was involved, I'm looking for a 3 row radiator for my car. Nigel

They starting to come out of the woodwork now, saw this as well http://www.ebay.com.au/itm/Datsun-240k-GL-1977-4D-Sedan-3-SP-Automatic-2-4L-Carb-/290661331405?pt=AU_Cars&hash=item43acc3f1cd I'm sure this ones been on before

??, mine has a tow bar, are you calling me old school ? :-)

Black vinyl paint :-)

I always move the decimal 2 places to the left to give me a 'rough' idea, 30K / 30000 = $300ish http://www.ozforex.com.au/currency-converter/JPY/AUD/30000/false 30K is $380 Nigel

try this, http://www.ozdat.com/ozdatonline/enginedesign/

Also some heads have different chamber sizes as well, what head was on the engine, and what heads do you have there's a casting on the front right hand side ( near where the fuel pump fits), may have N42, N47, E88, etc.. http://www.bandmzcars.com/headinfopage.html Nigel

Yes it will fit, valve size maybe smaller than the L28 head, depending on what L24 head you got, Nigel

I see people call the C210 a 240K ? any idea why, or where the badging for this comes from ? Nigel

correct, because they are not fitted with extractors from factory, only 1 of my 4 had extractors...

It does look neat and tidy..

it's only a 4 door.. I have 3, two for parts, 1 for my daily drive.. now if someone offered me a heap of money, I would sell my DD and 1 parts car... Nigel

A 2 door 240K has this ID : KHGC110 A 4 door 240K has this ID : HGC110 a 240K GT has a ID of KPGC110 It's stamped into the firewall Nigel