Everything posted by astrohog
-
Z's on BAT and other places collection
Are these what you are looking for? factory style hose clamps
- L24 timing chain slack after heavy duty valve springs
-
[2026] What Did You Do To/with Your Z Today?
Painted my freshly bored and decked block. Internals are out for balancing and should be done tomorrow. Then I finally get to start re-assembling!
-
Banjo fittings for carbs
that was the first and easiest to link to. there are others that are cheaper
-
Banjo fittings for carbs
I believe you can buy AN banjo fittings that will fit. Earl's banjo for Weber
-
looking for a N36 intake
N36 received and cleanup has begun! Thanks Terrapin!
-
looking for a N36 intake
2.9 liter. F54 block bored to 89mm, P90 head (L-spec Datsun prepped) shaved .080” and ported, Isky stage 3 cam, Kameari forged flat-top pistons, stock rods, 1.9 R200 mated to close-ratio 5 speed. Only going bigger to port-match with the head and SU’s and to do a bit of smoothing. My plan is all theoretical at this point, so we’ll see if it pans out to plan! Not going racing, just wanted a nice, reliable, smooth, quick-revving, streetable engine that looks stock, but cleaner. Trying to keep car as original as possible, with period-correct mods that can be returned easily to stock if I (or the next steward) wish. I’ll be re-building (stock) the numbers-matching L24 and pickling and crating it to always go with the car.
-
looking for a N36 intake
no, I have not. I do not have an N36 in front of me to compare, but internet legend says the N36 have larger runners and a straighter shot to the head than the N33 and that the N36 will require less grinding when port matching. Not making any HP claims, it's just that I am trying to minimize the amount of material I have to remove. Every decision I've made on this build has been to get as close to ideal as possible. I did compare the N33's and a pair of E36's that I have and the runners are noticeably bigger/straighter on the N33's. If the N36's are a little better, then it makes sense to use them if I can find a pair. I spent good money on the head to maximize flow and volume, I might as well do what I can to put it to use!
-
looking for a N36 intake
yep, that sounds right. I have an N33, but just found out as I'm beginning my engine assembly, that the N33 needs a lot of work to maximize the flow I will need.
-
looking for a N36 intake
Anybody have an N36 intake laying around? I'm in need of one, hit me up if ya got one!
- N36 intake
-
Let's show vintage racing pictures. I'll start.
Here's some video! Laguna Seca Historics 2026
-
Z Cars In The Wild
I didn't see it personally, and I'm not sure it even qualifies for this thread, but here it is anyway! LOL Seen at Sturgis bike week...
-
Let's show vintage racing pictures. I'll start.
try this one: Phil Stott Motorsports
-
Let's show vintage racing pictures. I'll start.
No, the black and white #112 is my cousins, but we were pitted with the red, white and blue #57, which belongs to my cousins' friend and race partner who often attend events together. They will be taking the pair of 1200's to the Rolex Monterey Motorsports reunion at Laguna Seca in August. Wish I could go to that one!
-
Let's show vintage racing pictures. I'll start.
Not vintage racing pictures, but pictures of vintage racing! LOL Snapped a few at the PNW SOVREN event this weekend. Had a blast!
-
Anybody going to the PNW Historics?
I'll be acting as "pit crew" for my cousin who will be racing his 1200. Hopefully I'll have time to check out the corral.
-
Anybody going to the PNW Historics?
Anybody here attending the Sovren Racing PNW Historics at Pacific Raceways over the July 4 weekend featuring Peter Brock? I'm looking forward to what should be an entertaining weekend!
-
Top Speed of 1975-1978 280Z
5 mph over the posted speed limit.
-
[2026] What Did You Do To/with Your Z Today?
P90A (non hydro version).
-
[2026] What Did You Do To/with Your Z Today?
Been collecting all new parts for my engine build. Block is at the machine shop, was sonic tested and bored, just waiting for pistons to arrive for final bore/hone. This piece just arrived 😁....
-
Look what showed up today!
There IS a block of wood underneath it.......
-
Look what showed up today!
L-Spec Datsun P90 head. 5 angle valve job stainless steel valves rocker arm resurface short bronze guides stage 3 Isky cam (.490 lift) Isky springs L-spec retainers Kameari lash pads low profile valve stem seals CNC ported I will be mating this to an F54 block bored to 89mm with Kameari flat top pistons on stock rods.
-
Look what showed up today!
I've been collecting all the parts for my L28 build and this is one of the last ones to arrive! Still awaiting Kameari flat top pistons, block has been bored to a rough 89mm, final boring/honing will be done when the pistons arrive. I can't wait to start assembling it!
-
I think this applies to many of us who frequent this forum
I don't know how to work on my car, but I do it anyway. What does that say about my psychology? LOL