Leaderboard

RNM at $25,000. Reserve too high or market too tight with their money? Scary times ahead here in the States.

I was able to get M4-.7 x 20 oval head screws locally but had to paint the heads with gloss black rattle can. Needed fasteners to hold the A/C control panel on the ICF but no one has oval head thread cutting screws the right size. Ended up getting #6 x 3/4" wood screws which were also painted gloss black. Used a #6 countersink drill bit to prepare the plastic panels I fabricated (pix will follow soon). Looks great when assembled on my workbench and now looking forward to getting everything attached to the car.

Damn- 5 year update ?!!! I’ve been thru several induction systems including Protunerz . Now running these FAJS . I’d say this package runs better than anything I’ve had on this engine . The Protunerz ran good but I think the runners were too short and fat . I did manage 35 mpg driving to the Woodward cruise last year with that manifold - that’s at 80 mph -windows down! I’ve been blown away that I’ve been able to get these ITBS tuned in so well . First start it idled at 750rpm . I run the cable linkage which like any linkage has to be dialed in correctly . I was always told that when the engine gets hot the idle rpm will climb , but I’ve got these to idle better than my single plenum . These are 45’s . The stacks are 75mm long . I have not dyno’d this package . Looking back at this thread I can say I was running too much ignition timing . Also blew up #6 piston . I run 28 degrees WOT . Finally got smart and made det cans to wear while tuning . I had some pinging at peak torque . I still run a lot of timing at light cruise - thus able to get lean cruise . I think I got high 20’s MPG going to ZCON . I was still tuning on the fly . Though I ran triple Mikunis before - I didn’t think I would do ITBS because I thought they would be to challenging . They are a challenge but glad I did it

Naaa. I'm just trying to figure out who's running this new Z car parts store. And, as usual, you're ignoring what was written and projecting your own thoughts in order to create an argument. These guys clearly state that they intend to restore the cars to how they were as they as they left the factory. SpeedRoo pointed out some things that were not that, but you just ignored that reality and chose the argumentative path instead. Typical. They're just selling car parts, in the end. Nothing wrong with that, but nothing noble about it either. The Z car market just looked like a profitable one. Good luck to them. S30 World - The place for the S30 familyS30 World | Your online Datsun and Fairlady Z parts shopS30 World offers a selection of premium products designed to enhance your Datsun. Explore our quality parts to restore your Datsun or Fairlady Z.

Pad in use. Nothing new in terms of any work on the Z. Had a carport built Weather still OK, so I've been driving her around as much as possible

Looks like a pretty nice 240Z. Bidding at $17K with an hour to go. https://www.hagerty.com/marketplace/auction/1971-datsun-240z/0992a21b-6574-49c6-91f2-56f7b6250d67

Last thought... I think that welding the buckets to the fenders and removing that seam line is a great improvement to the looks of the car. When done right, of course.

Yeah, Im not convinced myself. This is their latest youtube video featuring the shell. As Alan mentioned above at the end of the day a Datsun with a body made in China isnt a Datsun anymore!

The inner rear seat mount looks to be in the wrong place to me. You may want to have them double check.

@Mike As the title of this thread suggests... It's hammer time. It's time for you to wield the ban hammer. Wield it like Thor. ☠️ *If you wield a tool or a weapon, you handle it effectively. Picture a gallant knight wielding a sword or a skillful chef wielding a whisk. Or picture Thor. Or Mike.

Be patient, They are customer friendly and will get back to you. If your that concerned call them.

Won’t find this info on FB- lol. I worked on a 72 thru Covid . The guy texts me yesterday that he has no rear brakes . I put all new SS lines in his car and had to clean/ rebuild his brake switch valve . I’ve had the weirdest stuff with his brakes . The O rings failed on the brake switch and fluid was forced from one side to the other back up into the MC . Now his rear brakes don’t work - so after reading this I assume it’s that proportioning valve . I haven’t laid hands on it yet . Looks like I have good reference material here . Wish me luck

It's a remarkable bit of production. Kudo's to Nissan Canada for financing the project, and to the Canadian ad agency for designing and realizing a killer advert that properly and expertly recognizes the significance of the Z's role in creating Nissan's worldwide market presence (notwithstanding Nissan's Japan's efforts throughout the 1970's and 1980's to throw it all away). Additional kudos to Nissan Canada for providing its corporate facilities in Mississauga, Ontario as the venue for the annual show-and-shine meeting hosted b y the Ontario Z-Car Association (look it up). I'm really proud of Canada's (continuing) role in supporting the Z legacy. Here on CZCC, I would draw your attention to the importance of our Canadian members in making this site such a valuable Z resource. Those who come immediately to mind are 240/260/280Z (who's written a complete library of Z rebuild articles), along with Grannyknot, CanTechZ, Wheee and zKars (some of the best restoration build contributors that this site has enjoyed). I should also mention that, for years (dating back to 1994), Charlie Osborne at Zedd Findings in Kingston, Ontario, was (I believe) the only source worldwide for decent replacement Z floor panels and front frame rails.