Interior
Discussions about the interior components of your early Zcar.
2,351 topics in this forum
-
- 6 followers
- 24 replies
- 1.3k views
Has anyone here ever done a reupholstery job on their S30? In my restomod project I decided that I did not want a black interior, especially with that crisscross pattern material, and decided on light blue. I bought plenty of sky blue marine vinyl fabric from www.fabric.com (apparently no longer in business - at least using that name or URL) and it's a simple matter to do the tranny tunnel, doglegs, etc. using the OEM fabric for templates. I also got color-matched paint mixed for all the hard plastic pieces at a Columbus auto paint store (Ohio Auto Kolor). The rear wheel well covers are another matter and I plan to farm that out to a Columbus auto upholstery s…
Last reply by ArcticFoxCJ, -
-
- 3 followers
- 7 replies
- 470 views
I have a 1/1970 240Z (#1427). I have removed the sound deadening tar from the floor pans, and am preparing to replace it with new tar, using Wurth tar I found recommended here. That same post had a pattern for a 1970 Z. I printed out the pattern, but when I went to check the fit, the portion under each seat is of a different pattern than my car had. On mine, there is an additional (useless??) area cut out towards the rear. The front floor pan pieces DO match up though. I tried to look on Bring a Trailer/ etc for photos of other 1970 Zs, but the under-seat area doesn't seem to get photographed regularly (have to remove the seat, duh). Lots of photos of completely str…
Last reply by Warty, -
- 2 followers
- 8 replies
- 586 views
Has anybody with a 280Z used these MSA speaker panels? Not that I have my Z on the road right now, but when I do, I will need to add more speakers. I have a nice Alpine stereo with a few small amps, but I only have the two 4" quality speakers in the factory locations under the quarter windows. The sound quality is okay, but the system is all but useless with the road noise in these cars. I could build a real speaker panel like they used to sell and I might still do that, but the sound is still all behind me. Are the front kick panel speaker mounts worth getting? How much space do the eat up for foot room and do the speakers sound decent in those thin plastic h…
Last reply by Patcon, -
- 1 follower
- 0 replies
- 249 views
Just finished restoring my tail lights and one thing I did may help people so I'll pass it on. Not really mind blowing but useful :-). When I took them out I noticed the "melted plastic" I'll call it that retained the nut and cap for each hole was so brittle it wouldn't hold the nuts in anymore. Half or more of the 16 total nuts were falling out the back because the plastic the factory melted over was dried out and nearly gone. It's a miracle the PO didn't lose these lights honestly. Went to home depot got this fix it putty I've used in the yard to stop PVC leaks and it was excellent at repairing each nut placement. It even dried an exact match to the color of the p…
Last reply by Richie G, -
- 3 followers
- 10 replies
- 822 views
Hi Folks, I have a 1970 I've been tinkering with as time allows. The car originally had a blue interior, but then some nice person screwed down brown carpet, and another nice person after that installed black carpet and black vinyl in back. I am restoring to the original blue. I still have most of the interior bare, but I'm close to being ready to re-assembly everything. Just finished cleaning out the heater core and blower, should be able to get that reassembled by end of this week. I can't decide if I should try to do jute padding for trans tunnel and under seats and on rear deck, or DynaPad + Dynamat Xtreme. I have a new set of jute I cut myself, and I have …
Last reply by Richie G, -
- 2 followers
- 6 replies
- 447 views
I found a NOS pointy tip about a year or so ago and just getting around to install it in my 6/71. It's a pain in the arse let me tell you. I'm either way off or something is missing. Does anyone have picture of the original setup and also what the bracket looks like? Here is a picture of the antenna as I received it, are these pieces at the top in the right order? Assuming they are, when i try to put it in the toothed half wheel seems too small for the hole in the panel and keeps coming up through no matter what i do to steady it for the washer and nut.. I must be missing something because it's near impossible to orient these with only the two hands God gave me lol.…
Last reply by Richie G, -
- 2 followers
- 4 replies
- 352 views
I've undertaken an interior restoration and taking it as far as I can based on my skills. Starting with the rear I stripped it all down to the bare metal, did my por 15 and repaint, and am now ready to put the sound deadener back. I chose kilmat 100 for a decent price to performance ratio before I really got into this effort. After I've painted the bare metal it looks so nice I'm almost hesitant to put the shiny stuff down rather than something more original I could paint. While I struggle with that decision lol, I'm wondering if I can get some opinions on where to put the new stuff in the deck area. I've already decided the original location a must plus the vapor ta…
Last reply by AK260, -
- 2 followers
- 28 replies
- 16.2k views
I have the moldy, torn, original Jan 71 240z firewall insulator that I wish to transcribe to a new material. Can anyone recommend a material to use? I plan to put peel-and-seal on the fire wall along with bubble foil for sound deadening and thermal insulation so the new material does not have to insulate. Maybe even just a semi-hard material to replicate the carboard/masonite part of the insulator will suffice. I need some ideas before I hit the material/fabric/building supply stores Thanks as always!
Last reply by Warty, -
- 1 follower
- 5 replies
- 452 views
I am re-skinning the doors of my 1970 240Z, putting them back to blue. When I removed the door cards, I checked to see how much rust could be found inside the cavity of the doors (luckily: none, except some very light surface rust inside the very very front of the passenger door. Also at the very very front there, was a lot of stuff. Washers, bits of old clip cups, etc. But these 2 white mystery disks... Anybody know what these are?
Last reply by Warty, -
- 1 follower
- 0 replies
- 272 views
So, I did a scan of this panel. I don't have a 3D printer, but I thought that if anyone wanted to make an attempt at it or needed the part, I'd post it. I'm not real good with this whole 3D printing thing, but I'm having a good time playing with scanning these various parts. Here's the file. If anyone uses it, please let me know the results. Adjusted - 280Z AC Vent Cover - 2.stl
Last reply by LorenB667, -
- 3 followers
- 7 replies
- 489 views
Does anyone have the upper portion of a steering column shroud for a 76 (I don’t know if there are year differences) that they could get a good scan of or if they already have an STL of it, I’m in need of it. I’ve got my original lower that I’ll be scanning and making an STL of it so I can get one 3D printed. I’m planning on doing more scans and creating STLs of as many parts as I can. I’m using the PolyCAM app on my phone.
Last reply by Terrapin Z, -
- 6 followers
- 30 replies
- 6.4k views
Hi everyone, I am about ready to start the interior restoration process of the early Series 1, 1970 240z... and I am curious to know if there are going to be any "gotcha!" moments when installing things on the bare painted chassis from the ground up. There are literally no parts on the chassis interior. I've made a list below. If anyone has insight- that's be helpful! 1) I am not sure if I should use some sort of sticky tape to make it removable at some point, or if I should do it how they did it from factory and glue it down. Suggestions? 2) What should the general order of things be? Should I put down the transmission hump pieces firs…
Last reply by Warty,
-
Recently Browsing 0 members
- No registered users viewing this page.