All Activity

I am going to resurrect this thread since sealing our oil pans never ends :-) I posted back in 2015 that I used a gasket which was sandwiched with Permatex Grey. It lasted me till 2024 (9 years) when the oil started leaking again. And boy, it was a major b$tch to remove it! Then I decided that I probably shouldn't be applying semi-permanent solutions again lol. I removed/cleaned both surfaces, made sure my oil pan was straight and applied a thin layer of Permatex Black to the oil pan to glue the cork gasket. Once it was cured, I put the oil pan back with a few dabs of Black in a few spots where the FSM is asking for. I installed the reinforcement 2 metal pieces and applied small torque to bolts per FSM. I did the same to my valve cover and it is working. It also makes it super easy to remove to do valve adjustments. Well, the oil pan gasket lasted me 6 months, the oil is leaking again. I think, it was Captain who asked if someone could manufacture a nice long thick reinforcement piece (we will probably need 2 for ease of installation)? If someone makes one, please sign me up.

Not so much trained but he does what he wants and gets what he wants I guess by just paying attention. He's the reason I get out of bed, his name is Rolex. I know what he wants and he knows what I'm about to do and runs and hides under the bed. Hates baths and toenail trims, cleaning his big ears are a weekly fight too. But I can't imagine my life without a good dog. So yeah I guess he is trained but I didn't do it, he did.

Knowledge of 240Z wiring.

Sorry Mike... It's not. I know you wanted it to be. ☺️

They all are, my friend. They all are. ☺️

I did not see where they sell just the wire harness. Am I missing something?

Have you trained him to do anything else?

LMC Middle School https://lmc896.org in Lower Manhattan provides a rigorous, student-centered education in a caring and inclusive atmosphere. Emphasis on critical thinking, collaboration, and community engagement.

That's exactly what the problem was on my car. I had a puzzling oil leak, seep, about a tablespoon every 30 miles or so. Small spot under my car after sitting. I knew the leak originated near the fuel pump, but was fearing the worst, head gasket. This was one of the last of 25 pages of doing a search for "oil leak" that I read. Decided to go check those bolts, YES! I had loosened the bolt to adjust the alternator but forgot to tighten it. The others in the sane vicinity were a bit loose also. Took it for a drive, no more leak.

And I thought it was some hot asian chick who drove a Porsche... O_O

Thanks, this car is a never ending story lol. Now I am hearing what sounds like my speedo cable in the front making buzzing noises which increase and decrease with RPMs :-) I must have bumped it when I was attaching the master cylinder's rod to my clutch pedal.

Now that’s a smart Dawg!

Glad to help. And hope your clunk is gone for good!

I've used Hastings twice and didn't run into any problems. My dog has started eating those gummies all the kids are raving about. Now he just lays around and poots and then laughs about it.

Hi Site…..When installing new pistons and rings in an expensive rebuild, I want to feel confident that when I squeeze those pistons in the bores, they are perfect. The ITM pistons are awesome. When installing rings, I have found that the Total Seals oil rings mate up so easy that I can sleep at night shoving the pistons into the bores…….just me. I’m sure that ITM oil rings and Hastings will work, but I just never felt like I had them installed correctly….at least not in my mind. An extra $200.00 for top quality rings always seemed worth the investment…..whatcha think? BTW How’s your dog? Regards Guy

Another way is to go through the tachometer opening if your hands are small enough.

Never mind. I erased my internet history and the problem went away. Didn't know that "cookies" could do that. I think I had clicked on something by accident. Back to original programming...

About this Vintage Z - As I recall - this one first showed up for sale about 20 miles North of me. New Port Richey or Holliday Florida. A friend of mine went to look it over, and reported that it was very poorly cared for. The next time we saw it, was its first sale on BAT. My fiend remarked that it had been very well detailed for that sale and looked 100% better than his personal inspection. Now we see it again, with an owner that put some significant funds and I’m sure elbow grease into it - to bring it up to better condition. Will the customer modifications hurt its market value? Not as much as the current market itself, the mod’s might hurt it a little as most collectors don’t want to mess with fixing anything.

I am located in Austin TX

Yes, thats the point Im trying to make. I also note that Carl has this particular car logged on his "Vintage Z" Owners Register. The photo of the car shows that it had original steel wheels and "Z" style hubcaps installed, I assume when it left the remanufacturer. So, the installation of the Panasports is yet another change from "Factory".

Is anybody else suffering a barrage of ads on the forum? Just started. I'm signed in and even getting pop-ups even though I use Adblock. Never had this problem on the CZCC forum.

Yikes! Also see some nastiness in the comments, (468!), from 2020. Didn't read through them but Lstepp4re seems involved. I don't keep track of all of the players on BaT so not really sure who he is. It's up to $70,000.

It was extremely tight but with gloves on i was able to get couple of turns to get the cable seated on the threads. Rest was the pliers ... (you have to go under the dash with a light to have some visibility).

How would you get your hand in there with the dash in? The defrost cowling removed is not near enough room to provide access.

Just noticed that car was on baT in 2020. The new owner did some work on it. Wonder if the new work diminished or enhanced the original Restoration work. Original > Restored > Enhanced? It's definitely shinier now than then. 105,240 + 9,000 = 114,240 to break even. "...A paint correction service was performed, and the paint was ceramic-coated in September 2021. ..." https://bringatrailer.com/listing/1972-datsun-240z-127/