zed2

As I see the photos, the A pillar coverage would compliment extending the landau material to the hood. Naturally, the engine heat may effect adhesive, so my rivet solution can be extended to the hood area. There are way too many stock 240Z's around. I want my car to really stand out at a car show! Keith

Nice, the illustration show adhesive. I thought some black rivets (to match the vinyl) would be a better alternative. Glue and other adhesives can deteriorate due to heat and moisture. I want some permanency to this enhancement. Keith

Since I have plenty of time on my hands, I thought now is the time to add a bit of distinction to my 1970 Safari Gold 240Z. Most people add weber carbs or fender flairs. My idea is the landau top. Here is a photo of an install. Ignore the beltline molding for now, I would add the molding once I can find a manufacturer that offers one that can be screwed to the body (I do not want the stickon type). The manufacturer of the top offers one day shipping, so I will get it tomorrow and have the install completed by Saturday. I'm so excited! I'll post photos when I am done. Maybe a group buy can be arranged for other Z owners!! Keith

Word on the street is that @jfa.series1 is busy removing corrosion and contaminates from Z parts....he probably will not have his "paint application" hat on until the weekend!!

Bump

Would you (and your spouse) rather have a 21k-Mile 1971 Datsun 240Z Series I or $310,000? Don’t think too long about the answer! Keith

Page number should be “JFA-20”?

Interesting comment. I believe early USA delivered vehicles had a 11 mm ball joint shaft. (Later vehicles had a larger shaft due to ball joint failure.) Keith

What are the three holes on the seat base used for? Thanks, Keith

New Year’s Day we will cut the slits in the cargo deck carpet to accommodate the luggage straps. What will you be doing? Keith

Bonzi Lon and fuzze, Do you have a close-up photo of the original Nissan fastener/rivet used to attach the original rubber seat strap to the seat clip? I am most interested in the head shape (positioned close to the seat foam) and the washer/crushed fastener end that is positioned on the opposite side. Thanks, Keith

From my research all 1970-1978 had the protectors. The later model 240Z seat that had the reclining mechanism had a different shape to the clear plastic, but same gauge material. Keith

The WSJ is very restrictive on access to their articles. Try this link: https://amedpost.com/when-datsun-met-corvette-sparks-flew/ Keith

National attention from an authoritative publication. Enjoy reading the Wall Street Journal. Keith https://www.wsj.com/articles/when-datsun-met-corvette-sparks-flew-11569942100

To clarify, my quest is for the 2-3/8" metal clips...not the fastener (rivet) or the hog ring. Thanks, Keith

The clip material diameter is 1/8". It would require considerable time to create a jig to hold the steel rod immobile for the tight bends of the clips. Keith

I need sixteen (16) Datsun 240Z seat strap metal clips. Does anyone have a resource to share? (Zeddsaver will have some stainless steel ones soon, but I prefer to continue on with my project in the next couple of weeks.) Thanks for the referrals. Keith

I have a set available. See: 1972-1975 Fuel cap and ring (new plating) Keith

Any recent development to report on the Jute topic? Thanks, Keith

Kats, I have obtained a sample of a light blue/green cloth. Do you still have the original cloth on your seat bottoms to confirm the color match? (If so, I would mail you a small sample for verification purposes.) Keith

January 2019 orders completed. Thanks to all. I have to research a way to simply the production, these pieces require custom cutting and it is very difficult to make all precise cuts. Keith

Please see the classified if you are interested in a set of the reproduction clear vinyl seat protectors. Keith

Since these clear vinyl seat protectors are no longer available from Nissan, nor are reproductions available from existing fabricators, I sourced a large quantity of clear vinyl material to fabricate reproductions. These are for the 1969-1971 seats that do not have the recline mechanism. Set of eight (8) as shown in photo, (plus close-up photo) Material is same gauge/thickness as original Photos show: Set of four (4) original, aged and yellowed clear vinyl seat protectors and set of four (4) reproduction clear vinyl seat protectors. . Set of eight (8) reproduction clear vinyl seat protectors - what you would receive upon ordering. The pricing is $38.00 shipped to a CONUS address. Shipping will be via FedEx Express Saver, insured, with tracking. If you are interested in a set, please PM me your full name, mailing address and Paypal address. I will then send you an invoice. Note, these are time consuming to produce. Therefore, I will only send the invoice when the set is available for shipment, maximum 1 week timeframe Thanks, Keith

Machined a punch to stamp the holes in the seat clear vinyl protectors on 12/31/18.....closing out the year working on the Z.

Kats and nix240z annd others, What type of material (canvas, linen, duck cloth, etc.) was used for the light green material? This material appears in the photos that accompanies the the three (3) rubber straps. Thanks, Keith