seerex

pretty funny but if I was watching it and the painkillers I am on are not playing with my eyes they could steer from either wheel, pretty damn good work then , impressive and yes very funny:geek:

i got the bottom of the nozels up flush with the carbs but I can not get the car to idle when warm , it start spitting and sputtering , I just need it to idle so I can adjust them like in z therapy video, its weird when on choke it runs ok very rich but ok , any help would be appreciated

I had planed on buy a "set" including lash pads and rockers , i have factory type 2 tranny 4 speed , dreaming of a borg 5 speed , and was hoping for the 180 rear end with the 3.94 I think gears , not sure if I am correct but something simliar to that . i also am putting in a electronic dizzy , not sure if that makes any diffrence , I didn't realize the 2.8 stroke would amke the higher rpms not quite as effective , but i do love the ideal of more torque

hello all , I am having my newly aquired e-31 head dipped and ported and polished with a multiangle valve job . its gonna go on a flat top piston f-54 block , stock bottom end except for turbo oil pump and being rebuilt, headers n-36 intake port and polished, and rebuild SU's , was hoping someone with a similar setup could give me a suggestion on a good cam to use I want to keep the car normally asperiated, its won't be a daily driver it will be mainly a sunday driver, any help would be appreciated with getting the right cam and any other suggestions for the engine , thanks Jeff:geek:

this is the owner of the car listed in the pics he is selling it , he might be able to get you better pics or more ideals,http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=6763&item=2446799102 good luck Jeff:geek:

i thought it was too good but sometimes need to be told so , well I think I will stick with the seat in msa from a local dealer atleast I am guaranteed a correct fit:geek:

before buying a new one which will be big bucks i would look for a partial harness or one from a junk yard , kinda a long shot , but my brothers 260's rear lights went as we went along all of the sockets needed attention so it never hurts to have extra, good luck:geek:

I have emailed alot of Japanese makers of wheels and after alot of typing found most will ship to you or somebody can get them , not sure what is expensive as in wheels for ya , but I got wantanbee and ssr to give me dealers in the us where I was told by about everyone in the states I deal with that they could not be gotten, kinda pricey yes roughly 300-450 a wheel but new and nobody on your block will have them, it helps to take the time to figure out what all is printed in japanse on their site, good luck Jeff:geek:

Anyone know if nismo ever made seats? I have email the seller but the price and look isn't bad . Hoping to make sure rails are not gonna be a prob whatdaya think? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33701&item=2446479432 thanks Jeff

if you are gonna rebuild your fan clutch check out this post I found very helpful , good luck Jeff:geek: http://www.classiczcars.com/forums/showthread.php?s=&threadid=10401

you can also use a radiator hose reducer for that if you had to , I used that for my heater hose on my 240 worked well when I removed my water from the manifold , I got mine at auto zone was like 3.49 , great deal in my opion Jeff:geek:

great post guys , getting ready to remove my electric fans that are horrible , got a fan/clutch from ebay , now I know how to rebuild before installing , well let you know how it goes , thanks Jeff P.S. anyone have much luck with the fan shround from msa? in florida here need all the cooling help I can get

please let me know where , Orlando area here wanted to redo the carpet and do the tunnel as well as strut towers , love to se pics when you get them up thanks Jeff:geek:

Can't tell you the size but msa has it and if its like the 240 one size is larger than the other , with reguard to the ends , msa catalog page number 72 probably part 15-6222 , good luck Jeff:geek:

I think this is the link there were intending to put up , its very use full building a f-54 and e31 combo , good luckhttp://www.geocities.com/zgarage2001/z.html anyone have a breakdown anywhere of specific up grade to do when rebuilding this , heard of the crank bolts and turbo oil pump just was curious,Jeff:geek:

christmas again? damn I haven't finished paying off my visa from last year

I have been told that 20w castrol if best for the carbs or fork oil , If you are talking about the float lines from the carbs to the air cleaner , it won't affect how it runs it just dumps the extra fuel from the carbs <if any is there> to the air cleaner, if we are talking about the same line. and if you put too much in the carbs its ok if you raise the piston inside the carb it will get rid of the excess and just get burned in the engine <as I was told on ye olde ztherapy video > , good luck:geek:

can anyone tell me if this is the correct fan for a 72 240z , I need it and hate to buy new 221 from nissan and 160 plus shipping from msa , http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2445936974&category=40017&rd=1 I have electric fan and can't get them shut off after I got my car running , they stayed on for 5 mins after so I pulled the link and they sounded like the bearings were bad , thanks all:geek:

you can buy that exact spoiler from motorsport auto http://www.zcarparts.com/ they also have a very good selection of stock and performance parts , also victoria british , alot depends on the part , if you have su carbs I recommend ztherapy highly , did business with them and was very happy , http://ztherapy.com/ if you need any more info on specific parts suppilers many people on this site can help or they might have them as well, did alot of homework from this site for my 240 , great people on this site good luck Jeff

I have seen webrings that were car clubs not sure why they wouldn't have a z one as well , that would be my first place to start , other than some newspapers will advertise in like the automotive section < we have a thrusday ride section> put an ad for starting a new club , good luck

I think there is an issue somewhere there, you got me worried as well , I have planned a simliar motor except an e-31 and su carbs , hope you get it back up to snuff