280zzzzz

I figured that removing those push/pull cables and immersing them in penetrating fluid was the answer. I have read various write ups about removal/install procedure. The way the Owners manual author implies the ease of these procedures, is another excellent example of the Japanese sense of humour- and the opportunity to perfect our patience and contortion skills while doing a headstand in a confined space.... Sent from my iPhone using Classic Zcar Club mobile

Sent from my iPhone using Classic Zcar Club mobile

Cont’d with not much success. I can not find a new rod/cable? Any ideas will be appreciated. Sent from my iPhone using Classic Zcar Club mobile

I recently blew an interior heater hose, and while under the dash, I thought it would be prudent to look at the heater core and valve at the same time. Core is ok, and the control valve is not leaking. The lever on the valve can be moved relatively easily. The issue I have is the dash hot/cold lever is very stiff to move... Possibly corrosion btwn actuator rod and cable housing? I have tried penetrating fluid with rod/cable still installed wit Not Sent from my iPhone using Classic Zcar Club mobile

Rotas 15x7 Polished lip - Modified Cap Sent from my iPhone using Classic Zcar Club mobile

Hey Mark - Thanks for the kind words. Unfortunately we lost the fantastic Westwood many years ago to several thousand houses... A big loss to all who knew her. Sent from my iPhone using Classic Zcar Club mobile

The best one I've seen is "Tile" - it does use radio waves to communicate to your phone/tablet running the app - or if the item is reported as lost- any other tile user within 50Ft of your item worldwide!! Sent from my iPhone using Classic Zcar Club mobile

That is a great Opportunity! Sent from my iPhone using Classic Zcar Club mobile

+1 Sent from my iPhone using Classic Zcar Club mobile

Sent from my iPhone using Classic Zcar Club mobile

240 Head /280 Block / Maxima D Crank / Forged Rods-Pistons / Cannon - Webers Thanks for the Interest Sent from my iPhone using Classic Zcar Club mobile

Today hyperventilated about Excellent but slow, no, extremely busy engine builder.... Sent from my iPhone using Classic Zcar Club mobile

Thanks : I think it looks pretty good - There is a little more detail than the stick on type. JB Weld 5 minute 2 part plastic cement seems Rock Solid

Haaa Pop it is just like me to do it the hard way - I had not seen those

Rota RB wheel center cap modified with "Z" from original hub cap.