siteunseen

Yes it came from CA. That's box 1 of 2, the other was the 2.5" exhaust. It's nice and clean and looks to be the same size box as they crammed the header into. This exact same thing happened a few years ago, called then e-mailed pictures. They sent a replacement header with a Fedex pick-up form for the damaged one.

Mr Palmer will send you a set. I may get some new ones myself. 8)

Here's my ceramic header as delivered to my front porch a few weeks ago. Luckily there wasn't a scratch on it. MSA packed it into that box knowing it wasn't big enough.

If you decide to replace the hoses use a length of nylon cord or string and lay it around each hose then measure that. Add an extra 10% then round up to the next foot so you'll have plenty. I looked for my receipt from O'reilly's for lengths and part numbers but couldn't find it. For the 90 degree bend I used two 3/4" P.E.X elbows with 5/8" low pressure fuel hose.

I've always liked "Cool Hand Luke"

Well I thought about that but it looks too big and it's not black. You stumped me with that.

I'll second that comment! It's my favorite.

I don't know if you'd be a good partner on the $1000,000 Pyramid show. :: ::

That guy, Dogma, deleted his in that thread about coating your tank with Por-15. I've been on this forum for a few years and have never seen a post from him. Maybe the fumes got him?

Check out these pictures of an unvented tank, amazing. 1st post http://www.zcar.com/forum/10-70-83-tech-discussion-forum/295560-perils-unvented-gas-tank.html

Well hello Nice Car Guy. Those are beautiful.

Seems like there's 6 on the top and 2 smaller ones behind the tag, for the metal finisher. The interior plastic tail light cover has about 6 too, if I remember right. The metal pieces have to slide into each other at the middle (tag holder) then they have clips under the tail lights you have to line up and push in to. It can be a pain to do without scratching something, be patient with that new paint.

Yes, those are the ones (I'm talking to and about.) The vent is in that manifold up front on the driver's side? I've always thought the cap vented out the pressure. Motorcycle mindset. Thanks for the reminder, if you were talking to me about those bumps on the the outer edge of the gas cap. 8^)

What about those extruding "U" shaped bumps? What are they for?

Will you need 2 sizes, 88mm & 89mm? So two plates? Curious

A dulled #4 penny nail works too.

Doesn't the gas cap vent? 240s do.

This guy's vents through the filler neck it looks like, http://www.classiczcars.com/topic/17542-treating-insideoutside-of-gas-tank-with-por15-products-and-removing-evaporation-tank/ EDIT: It's the same as KurbyCar after I looked.

My 240 has taillight assembly's then the surround is a metal "rear finisher". You can buy the taillights and repaint the finisher. It's all held in place with plastic push pins. Behind the tag are smaller but both can be bought from Nissan dealers.

I'm happy with my SMs too. Floats should be .55" from the lids. Stock L24 with small valve E88.

Learned something new today. Never seen one of those.

So anything can be done to an '85 or older car as long as you pay the $200? That's very similar to why I vote, it negates at least one bad choice. A Prius pulls up beside a Ricer and tears come into his eyes, from the fumes. ::

85 and below pay $200 for their toys to pass? Cha ching!

That's amazing. I'm mad to have to top off the freon around here, house's and cars. 80 degrees Saturday.

Yeah they get crusty. Cover the threads with permatex anti seize. I should use that stuff on girls.