jfa.series1

We share the same transmission code - F4W71A (also known as the "Monkey Motion" shifter). To the best of my knowledge, the rebuild kits for these Type A units are NLA. That's why I have a type B unit from a parts car stashed in my garage in case my unit ever goes out. A very, very long shot might be to identify each of the synchros by P/N and contact your local Nissan dealer to see if they might locate them somewhere. The folks at Courtesy Parts (David and Butch) are good at running down scarce parts if they can be found. Good luck!

Bruce - sorry to hear of the accident but very pleased that you were not injured. Cars can be repaired or replaced, not always that easy with our bodies. I hope all works out well for your ride now that you are getting to enjoy a full power experience. Jim

Looks like a lot ripples in the middle at the back end, likely this work has warped the hood out of it original curvature. You can try working the curve back into it or replace as you mentioned.

Very good point, thanks. Dan, go to the Banzai site and look at decal DE-03. If your carbs linkage matches that image, then that is the decal set for your air filter box.

Check out Banzai for your decals, both emissions and air filter box. When you say "new" air cleaner box, I presume you mean the model with the heat riser tube connected to the snorkel. You indicate you have the earlier one without the snorkel butterfly and no riser tube. I think these models did not have decals but other members might better clarify. http://www.zzxdatsun.com/catDecals.php

View Advert S30 Hood Latch Receiver Hood latch receiver for LHD S30's. These parts have been stripped and professionally replated in yellow zinc. Comes with the striker plate and fasteners as shown. $65, includes standard domestic shipping. Payment via PayPal. PM me if interested. Thanks. Advertiser jfa.series1 Date 08/31/2019 Price $65.00 Category Parts for Sale

The cylinder-shaped tip suggests it is for a 260Z or 280Z, but will also fit a 240Z. Good find! Check it out to see if it runs up and down smoothly.

View Advert 240Z Heat Shield Completely refurbished – stripped to bare metal and professionally replated in clear zinc. This is the later style shield for 1970-1972 cars equipped with round-top carbs and the heat riser tube to the air filter snorkel. The plating on this shield came out extra shiny and smooth, very slight deform at the base of the angle tab at the rear. Reduced to $85, includes standard domestic shipping; international shipping available at actual cost. Payment via PayPal, PM if interested. Thanks. Advertiser jfa.series1 Date 08/24/2019 Price $85.00 Category Parts for Sale

View Advert 240Z Heat Shield Completely refurbished – stripped to bare metal and professionally replated in clear zinc. This is the later shield for 1970-1972 cars equipped with round-top carbs and the heat riser tube to the air filter snorkel. Reduced to $85, includes standard domestic shipping; international shipping available at actual cost. Payment via PayPal, PM if interested. Thanks. Advertiser jfa.series1 Date 08/24/2019 Price $85.00 Category Parts for Sale

View Advert 240Z Heat Shield Completely refurbished – stripped to bare metal and professionally replated in clear zinc. No pitting or other damage. This is the early style shield (1969-1970), prior to cars being equipped with the heat riser tube to the air filter snorkel. Reduced to $125, includes standard domestic shipping; international shipping available at actual cost. Payment via PayPal, PM if interested. Thanks. Advertiser jfa.series1 Date 08/24/2019 Price $125.00 Category Parts for Sale

View Advert 280Z Heat Shield Completely refurbished - stripped to bare metal and professionally replated in clear zinc. Some pitting is visible in the photos. Reduced to $60, includes standard domestic shipping; international shipping available at actual cost. Payment via PayPal, PM if interested. Thanks. Advertiser jfa.series1 Date 08/24/2019 Price $60.00 Category Parts for Sale

Just the one piece came to me.

Fresh inventory for PartZ R&R - S30 heat shields just back from plating, before and after pics. One for early 240Z without the heat riser, three regular 240Z, one 280Z. Coming soon: Fuel Rail Fiesta!

View Advert NOS Fairlady 260Z Choke Knob From the parts hoard: a NOS Choke Knob that I've determined is for a Fairlady 260Z. The tiny mounting screw is in the package as is a larger screw - possibly for related bracket. When i could not locate the P/N in the export car parts catalogs I did a general search and found a reference on a Japanese auction site where the guy asking 20,000 Yen ($188 USD) for one!!! This one can be yours for $75 including standard domestic shipping, international shipping extra at actual cost. Payment via PayPal, PM if interested, thanks. Advertiser jfa.series1 Date 08/19/2019 Price $75.00 Category Parts for Sale

Bye-bye VR-1, I see Lucas oil coming to a crankcase near me very soon. Very enlightening study, thanks for posting.

Regarding ZCON, the ZCCA Stock category is a brutally difficult class as Zup and many others have learned. The changes you listed might be difficult to undo and there will possibly be other items that need attention. There is no other stock class available, cars with up to 15 modifications typically compete in the Street Modified class where it is not so much WHAT you did but rather HOW WELL you did it. Your car would likely do very well in this class.

View Advert S30 Coat Hooks A pair of S30 coat hooks with screws, correct for any model S30 except Series 1 which had round chrome buttons. Can be used on a S1 if you are sick and tired of things falling off the round buttons! Excellent condition, no marks or scratches. $15 includes standard domestic shipping, Payment via PayPal, PM if interested, thanks. Advertiser jfa.series1 Date 08/18/2019 Price $15.00 Category Parts for Sale

Beautiful car, extremely well done. Congrats - now, drive the damn thing and get some long past due enjoyment out of it.

Mark, My 12/70 car has the round chrome buttons that are original to the car so i suspect these are for a later model. Thanks. Jim

View Advert 240Z Map Light 240Z map light with Series 2 style hooded bezel. Lens and bezel in perfect condition, switch works smoothly, bulb good. $50 includes standard shipping within CONUS. Payment via PayPal, PM if interested, thanks. Advertiser jfa.series1 Date 08/17/2019 Price $50.00 Category Parts for Sale

I have these coat hooks in my stash, bought as part of the parts hoard so likely from a Z. No idea as to year and model, any help? Thanks.

View Advert 240Z Sidemarker Light Set Refurbished set of front and rear sidemarker lights for a 240Z. These are the OE IKI 5004 series lenses, bodies, and rubber mounts – not the cheapo aftermarket stuff from China. The lenses have been cleaned and polished to a high shine, free of scratches. The stainless frames have been buffed to a bright finish. Bullet connectors have been replaced as required. The wiring on the front lights is covered in new protective shrinkwrap. The bodies on the front lights are original finish with no rust or damage, the bodies for the rear set have been freshly replated. The rubber boots on the front lights are the later style to protect against corrosion. Mounting screws and bulbs are included. The lights can be used on later model S30’s but may require different connectors. These lights are ready to install and are being sold only as a complete set. $175 includes standard shipping within CONUS. Payment via PayPal, PM if interested, thanks. Advertiser jfa.series1 Date 08/17/2019 Price $175.00 Category Parts for Sale

What he said ^^^. It doesn't hurt to put a wee bit of lube (just a film coat) on the barrel clip prior to pushing it thru the sheet metal.

Charles, Yes - I'd like the cap if available, thanks for thinking of me. It would be a better set with the mounting ring and three small screws. I'm going to contact the OP to see if he might pull some other stuff. Jim