Jump to content

IGNORED

Help removing front valnace


AlbatrossCafe

Recommended Posts

I am trying to remove front bumper and valance on my 1978 280z to make way for a new air dam.

I am stuck removing the valance. I got all of the obvious bolts out, but there are 2 issues:

  1. The side fender and valance appear to be "fused" together?
  2. The last few bolts have some kind of gunk/material that is nearly hard as rock stuck on them and I can't get to the bolts.

I thought the valance was 3 pieces. It looks like where the middle and side piece attach, there is a ton of gunk around the bolt that holds them together. WTF is this stuff? 2nd pic is zoomed in on area of first pic:

L6212UQ.jpgiGToKnN.jpg?1

 

Secondly, why do the fender and valance appear to be fused together at the seam? I didn't really want to take a screwdriver and hack at it... also, behind the valance in the 2nd pic below is another bolt that has a ton of gunk. No way I can get a socket or wrench around it.

9qqEnYY.jpg?11unwIwD.jpg?2

 

Any tips for getting these last few pieces out?

Edited by AlbatrossCafe
Link to comment
Share on other sites


I'm guessing you want to try to save your paint right?  So, If it were me, given the description of the foreign material, my first weapon of choice would be a heat gun to soften the gunk along with a small putty knife do a little digging.  I would start on the center piece first.  Once that is figured out,  then be very gentle with the side pieces.  Good Luck!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.