ROOPZ's Content - Page 5 - Classic Z Car Club Skip to content

ROOPZ

Community Member
  • Joined

  • Last visited

Everything posted by ROOPZ

  1. I was wondering about the possibility of putting a Holley projection unit on a L6. Has anyone done this? If you used a four barrel intake and the holley projection it seems it might be a fairly inexpensive way of getting better fuel injection. Any thoughts? What gave me the idea was a link I saw here for supercharging the L6. Jim Cook racing. He is using the holley projection on a small supercharger. The Nissan fuel injection was great for its time but it seems to have many flaws in it. I wonder what the effects of using a throttle body would be over the port injection. Couldnt you use this in turbocharging also? Just some thoughts going through my mind. (Imagine that!)
  2. Isnt that car in the motorsport ads? It looks pretty good. I can appreciate the work it took. But yea...14's is not that fast. What is funny is...in the ad he says you could drive it across the county if you wanted. hee hee! I hope he means country!
  3. Personally I do not care for the big arse wings on any car. Race cars...fine. But a car that is meant to be driven on public roads...it seems useless. As for the down force. I always thought (I dont really know mind you.) that the Z's had a problem of front end lift at high speeds. Wouldnt a wing worsen this condition? Obviously that is assuming no front spoiler. (rpmZ) I do love the car though. (yella delight) it is a beautifully done car and I would like for mine to look so nice! I also must compliment you on the website. Very cool!
  4. Like I said...dumb question. :stupid: "Ahmm not a smaht man...but I know what love is Jenny!" Thanks for the link. Aussie guys disregard my previously asked dumb question!
  5. I have always heard that draining water spins in the opposite direction from the way it does in the northern hemisphere. Is there any truth to this?!! I have never been in the southern half and am curious. My Fluids professor mentioned it. I dont understand the reason why... but I will. Roopz
  6. Hello Everyone! I am looking for an R200 from the 88-89 300ZXT. I think I have found one at a salvage yard 2 hours away. He says he has one anyway. My question is: How can I be certain this is an LSD short of opening it up? Is there any markings etc that would identify it? And is 250 a good price for such an item? Roopz
  7. I suppose I should introduce myself as well! First off, thanks to everyone who asnswers my sometimes :stupid: questions! I am Aaron from sunny Arizona! 33, married no kids (DINK's) I work for the Arizona Air National Guard and am a student at the UofA. Optical/Mechanical engineering major. I have been going to school forever it seems. My life is school, work and school! Occasionally I get to work on one of my 4 cars. My 78 Z is my daily driver. I have loved Z's since my brother had one when I was 12 years old. I have had two, and some parts cars. I also am a Camaro freak. <dodging rocks,tomatoes,etc> I have a 68 and a 73. Along with my 82 Mustang, and my 99 Yamaha R1. I love cars! I want one of everything! I love this site also so thanks to all who contribute!! ROOPZ
  8. Yea, I hate those rear end noises. I have the same problems with my car. I have come to the conclusion I need a new diff so I guess I will just upgrade while I am at it!! heehee LSD R200! I have the noise coming from the rear end and it is not the mounts,bushings,or ujoints (Everything is new). I am certain it is coming from the diff itself as when the car is off the ground you can turn the wheel a good distance before the driveshaft begins to move. So if the car bucks or letting off the throttle you can hear the clunk. I also get a "ticking" noise while in reverse. I too get the ~HOT~ gear shifter after driving for a period of time. I always assumed it is the exhaust heating it up. My lower boot is in ok condition but a new one might help. Even with all of its problems, I love my Z! Good luck!
  9. ROOPZ commented on CZCar's gallery image in Big Z Photo Collection
  10. Thanks guys!
  11. Thanks Guys for the replies. To answer your questions, In the morning or after sitting for quite a while, 2 hours or more, it will start right up and run beautifully. I have done a complete tune-up including new coil, plugs, original nissan wires, cap, rotor, fuel pump, filter, injectors, ignition switch. I checked the wire you suggested, sjcurtis, and it is already ran over and secured. I have not changed the fuel pump relay or the fuel injection relay or the AFM and I am planning to do that soon. I have the cd-rom version of the factory service manual and I agree it is invaluable. I have run the tests it gives for ignition and nothing is wrong according to the results. My Z is my daily driver so I want it to be dependable. Not that is isnt but I am afraid it will get to the point where it will refuse to start back up. Anyway, Thanks for all the suggestions! ROOPZ
  12. My Z has developed a few small rust bubbles under the gas door. I thought I had the rust treated before I painted the car but alas I did not. I had hoped to avoid cutting any metal out. My question is...Does anyone make repair panels for this area other than a whole quarter panel? Is the quality any good? Not that I have much choice! Also, the panel under the hatch....yea that area...does the entire rear panel need to be replaced or is there a repair for just the area that rusts? ( the flat area across the width of the car vs. the entire tail light panel) Thanks! ROOPZ
  13. Hello Everyone! I am wondering if there is anything I can do to stop my car from vapor locking. I believe that is what is happening. It runs sweet most of the time. Sometimes it will die while going down the road but that is a different story. What is embarrassing me is the re-starting after sitting a few minutes. I go to a store or whatever, go inside for a few minutes 3-10 minutes, come outside, get in, and start her up. Usually she doesnt protest starting UNLESS you let it die, then you are screwed for a few more miinutes. If it starts, it runs R-O-U-G-H at idle and doesnt take the throttle very well. You have to baby it some. It takes about 2-3 minutes atleast for this to subside and then it will run fine. It is a 78 280Z with all stock engine. I cant possibly be the only one who has experienced this. Also, has anyone experienced the car just dying abruptly while driving down the road and then kick back on a few seconds later? I cannot for the life of me find a reason for this other than the car doesnt like me! Any advice is greatly appreciated. ROOPZ
  14. You should NEVER trust anything that bleeds for a week and doesnt die...Or atleast I have been told. Best of luck to you.
  15. Anything is possible...as long as you have the money. If a v8 will go in there then I am sure the v6 could as well. You need to check out www.hybridz.org You will most likely find what you are looking for there. ROOPZ
  16. I have those exact same turbos on my single cylinder racing go-kart. There is not much lag at all. You really cant feel it if you have them set-up properly. Heehee...just kidding! Man are those things big! I would love to see them in action! ROOPZ
  17. Thanks for the posts guys. I guess I am happy (?) that I am not the only one having these things happen. ( I dont want anyone to have problems) I realize it is an older car and I love it because of that. I suppose I am too much of a perfectionist. I want it to be new! I bought it from the owner of 20+ years and he did a wonderful job of maintaining it. I have not found one jerry rig on it. He always had it serviced with Nissan parts. As for what could be my problem, I have not changed the module in the distributor nor have I flushed the fuel tank. I plan to do this (tank) when I pull it to convert the car to 240 bumpers. (Getting there...) As for the module, I was told it was not bad so dont mess with it. Is this the opinion of everyone here? Or do you think I should just replace it? I have read a few posts on the HEI upgrade. Is it worth it? I like my car looking stock so... Anywho, thanks again for the advice! RoopZ
  18. I am sorry to hear about your dog. That really sucks. I love animals and especially dogs. I dont have one personally because I dont have the time to give them. I work and go to school. Someday I will though. Anyway, I hope the good memories keep you happy rather than sad. Peace. ROOPZ
  19. Hello Everyone, I am wondering if the other 280Z drivers out there have cars that seem to have gremlins that cant be fixed or found? My car is a great car except for its occasional bad temperament. It likes to stall, hick-up, jerk, start up easily at times and not want to start at all other times. I have replaced so damn many things on it I dont know where to start now. Everything is brand new. All Nissan when possible. I am ready to yank out the L6 and buy an LS-1 I cant bring myself to trust it for any kind of road trip which is sad because that is wehere these cars are so much fun. At least for me it is. I am just curios if other people have these problems or if I am the only one. If you do experience these things, how do you deal with them? Do you drive it anywhere or hesitate to take long trips? Thanks! ROOPZ
  20. I had bought one of those universal aluminum radiators from Summit for my Camaro. I came to the quick conclusion that to mount it would take way too much modification. I wanted my car to look/be original (at least structurally! ) save for the all aluminum rad. I sent it back and ordered the custom fit radiatior made by BeCool. I love it. Fits like a glove and the car runs much much cooler than before. So in my opinion, spend the extra money for the custom built radiator. You will be happier with it. Good luck ROOPZ
  21. I too have had some less than positive experiences with them Mostly the service I get on the phone. One person in particular is the worst. I wont name names. Also, I agree they need some sort of computer update. my last order was delayed for 2 weeks because they were trying to charge an old credit card which of course declined it. They kep telling me they were waiting on the merchandise but then I get a call from their accounts payable dept and they accused me of trying to use a bogus card. I had given my new card number to them at least twice. I was p-o'd but their products are good so I am happy to have them there. I am just happy that I dont have to depend on them for anything...yet.
  22. ROOPZ commented on inline6's gallery image in Big Z Photo Collection
  23. ROOPZ replied to ROOPZ's topic in Open Chit Chat
    anyone?....anyone?....anyone know?.....Surely someone out there has done this swap and know what is needed. Can someone atleast tell me if the 240Z has a recessed area in the 1/4 panel? Does anyone here know anything about the z car? just kidding people! Roopz

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.