LeonV

I got a shipping quote from Fedex for $554... Has anyone shipped something like this overseas and gotten a reasonable rate (or is $554 "reasonable")?

Brought to you by Carl's Jr.

Again, I've not had an issue with fruits and water on the countless trips I've taken. Stopping once every few hours is good for you, anyway.

No idea, never shipped to Europe before. It is quite heavy which is where the problem lies. It would probably be 70-80lb all boxed up. You can give me an address and I can see if I can get a quote for you.

I've decided not to even post any counter-arguments for the tripe that Zedyone has been spewing. Good stuff John and Brandon, you're saying what I'm thinking...

Exhaust dynamics are much more complicated than "exhaust will cool off as they move through the piping, but it needs to stay hot for a little while." You seem to be designing your entire exhaust system based on a relatively trivial premise. Can't say I didn't try...

There are a few similar threads on this, some detail the problem better than others.

http://www.classiczcars.com/forums/open-zcar-discussion/40683-door-lock-repair-s30s.html

Water and fruit works for me. Trail mix without a bunch of crap in it is good too. Ensure and all that other crap is garbage.

Or Vintage Connections...

I've never replaced copper sealing washers, just anneal them with each oil change. Tighten the drain plug to German torque specs and you're all set. It's not very difficult.

Thanks for the lesson. I'm guessing you didn't read the link I posted?

I have a stock, 3/71 240Z rear diff for sale. I never noticed excessive whining or anything. It's up for $50 but I imagine shipping to NL would be very expensive.

Interesting. You must have had just enough oil flow then...

Check HBZ, I believe that's happening soon.

I bet you had just enough oil flow and that the cam was a reground Nissan piece. CWC blanks are not nearly as durable.

Those look like August Feroce wheels, Toyota guys seem to like them.

Well either the plug evaporated or your valve-train's wear surfaces are very high quality and well matched!

Damn!

I don't think you have a very solid grasp of exhaust dynamics. FWIW: Exhaust Tube Sizing: I did your Arithmetic for you!! - Exhaust - HybridZ

Good luck. This should have happened 4 months ago.

How do your rockers look?

Nice job! How's that type-A 5-speed feel?

You're 10 years too late...

Fantastic!