So I've been working in the shadows on the reanimation of an early 240Z. This is not so much a restoration, but more of a reanimation project. Reanimation of an lifeless vehicle with a focus on originality.

The OG 240Z:

This car hasn't been on the road for decades. Many decades. And in the end, he won't be pretty, but he'll be back on the road.

So let's start with the immediate... My intention is to drive this Z to the upcoming ZCON in Nashville and there are a couple things I need advice on before the trip:

First, I need to carry a fire extinguisher and I know nothing about them (other than they are supposed to put out fires). Anyone know the system and have a recommendation for which type would be best for automotive related incidents?

Second, I've got the original seat belts in the car, but they are the early non-adjustable style. I'd like to install something newer, safer, better, easier to use before the trip. I might swap the originals back in once I get there, but for almost 1000 miles on the road, I think I want newer technology. Is there an easy to drop in system for the 240Z cars?

ZCON or BUST!!!

I did these "Roadster" seatbelts in black from Wesco in my 12/70 car. I also needed the hardware accessory kit for the angle floor pieces. The retractor piece goes on the roof place where the stock shoulder strap attached. And I've been very happy with these!

Roadster Retractable Seat Belt

2 Point Retractable Seat Belt Hardware Kit HW#1

I drive a 56 Beetle, it didn't come with seat belts. You just have to drive it like you're riding a motorcycle.

1 hour ago, w3wilkes said:

I did these "Roadster" seatbelts in black from Wesco in my 12/70 car. I also needed the hardware accessory kit for the angle floor pieces. The retractor piece goes on the roof place where the stock shoulder strap attached. And I've been very happy with these!

Roadster Retractable Seat Belt

2 Point Retractable Seat Belt Hardware Kit HW#1

I second the Wesco belts. I tried them in the 260Z over 10 years ago (Edit: It looks like over 15 years ago. https://www.classiczcars.com/forums/topic/34379-replacement-seat-belts/) and decided to swap out the Wesco belts I installed in the 240Z over 20 years ago for the roadster belts a few years ago.

Edited 1 hour ago1 hr by SteveJ

1 hour ago, Captain Obvious said:

So I've been working in the shadows on the reanimation of an early 240Z. This is not so much a restoration, but more of a reanimation project. Reanimation of an lifeless vehicle with a focus on originality.

The OG 240Z:

This car hasn't been on the road for decades. Many decades. And in the end, he won't be pretty, but he'll be back on the road.

So let's start with the immediate... My intention is to drive this Z to the upcoming ZCON in Nashville and there are a couple things I need advice on before the trip:

First, I need to carry a fire extinguisher and I know nothing about them (other than they are supposed to put out fires). Anyone know the system and have a recommendation for which type would be best for automotive related incidents?

Second, I've got the original seat belts in the car, but they are the early non-adjustable style. I'd like to install something newer, safer, better, easier to use before the trip. I might swap the originals back in once I get there, but for almost 1000 miles on the road, I think I want newer technology. Is there an easy to drop in system for the 240Z cars?

ZCON or BUST!!!

Well done @Captain Obvious another one saved! I did the same with my August 1970 that languished in a garage from 1983 to 2018. Engine was seized and brakes stuck on. Dragged it home and rebuilt the suspension/brakes and got the engine going. I use it as my beach bomb to go windsurfing. One day I'll restore it but until then it gets used.