Spot the error in this page from my FSM purchased in early 1971.

“Without standard load” should be “with standard load”

1 hour ago, zKars said:

“Without standard load” should be “with standard load”

That's one but there is another that is more humorous.

Spring rate metric to SAE conversion units are inverted. Kg/mm to in/lb rather than lb/in. Numeric part is right, 1.48 kg/mm is 83 lb/in

Edited March 19, 20206 yr by zKars

Coil turns and Coil effective turns?  What is this?

My car had 2 cut out to make it 8, maybe 8.5? so I wondered about that too.

Coil spring RH and LH should probably be FWD and AFT

1 hour ago, zKars said:

Spring rate metric to SAE conversion units are inverted. Kg/mm to in/lb rather than lb/in. Numeric part is right, 1.48 kg/mm is 83 lb/in

Close but no cigar.

26 minutes ago, jfa.series1 said:

Close but no cigar.

What Monica Lewinsky said to her next lover. 

Somebody, anybody, tell me the answer! I need to get back to work and have that cigar.

5 minutes ago, Zed Head said:

Not the one I spotted.