2 hours ago, Home Built by Jeff said:

It is all in the video ?

I watched the video?' i'm not sure if you said that was at the wheels or not?

I noticed the Dyno RPM on the screen seems off? Was the dyno working OK?

1 hour ago, Jason240z said:

I watched the video?' i'm not sure if you said that was at the wheels or not?

The engine was in the car, not on a stand so that should give you a hint ? 

6 minutes ago, 240260280 said:

I noticed the Dyno RPM on the screen seems off? Was the dyno working OK?

Are you talking about the road speed reading? The Dyno was all working well.

The dyno stuff starts at about 10 minutes.  175 MPH!

1 hour ago, Zed Head said:

The dyno stuff starts at about 10 minutes.  175 MPH!

MPH or KMH?

Since this was done in Australia, it is probably KPH, which is about 109 MPH.

It was fuzzy.  I'm just glad there were no Newton-meter/seconds, or watts.

I couldn't read any of the dyno read outs

175kph. That dyno is strange though working in HP and ft/lbs as most here in Aus use KW and NM.

11 minutes ago, Home Built by Jeff said:

175kph. That dyno is strange though working in HP and ft/lbs as most here in Aus use KW and NM.

I was surprised to see it show HP.  Every other dyno run I have seen in Australia showed power in KW.

OK.  I thought the Dyno screens was rpm but it was kph so that clarifies it.