Yes, the brake booster hose would be great. Mine is 40 years old

I have been working on that, but you know $$$$$ is the issues.

From what I heard, it takes different type of material (rubber).

And this Manufacture does not do it.....So for now, I use very similar material and stick a brass wire (like hanger material) inside to make a shape I want.

I have been working on that, but you know $$$$$ is the issues.

From what I heard, it takes different type of material (rubber).

And this Manufacture does not do it.....So for now, I use very similar material and stick a brass wire (like hanger material) inside to make a shape I want.

Can he do fuel lines they are similar if the rubber he uses is fuel resistant. I'm thinking of the vent-lines

Which is which? I am not sure which is the nissan and which is the repro???

Carl

OK this is a better photo. The set comes in 3 different hoses as shown.

Is this the same set that is offered by the TheZStore (MSA)?

https://www.thezstore.com/product/4904/oem-style-braided-heater-hose-set-70-72-240z

Thanks,

Keith

 

Have you checked with @Resurrected Classics

2 hours ago, Yarb said:

Have you checked with @Resurrected Classics

I contacted them…they do not have a close-up photo of their hose which they will share, so I cannot determine if their hoses “braid” matches OEM.

Keith

What does MSA say? Hard for me to imagine Max wouldn’t send you a pic.

Edited June 10, 20242 yr by Yarb

I bought mine through Nissan dealership right down the road. Got them next day but Nissan's are smooth now with arrows pointing the flow.

240zrubberparts did have the braided a few years ago. Zcardepot might too.

Good luck.

Mine as well. Cloth not available from Nissan.

David at MSA would only say they are sourced from Japan.   He did sent me a photo of the Aftermarket heater hose and an OEM reducer hose.

 

Pretty close!

Keith

Here's some of the coolant and heater hoses from resurrected.

 

Thank you.

Keith