All Activity

Sounds good - I'll give it a shot. Thanks

If the light is right you can probably see the notches through the hole. In practice you just jam a small screwdriver in the hole until you feel it grabbing the notches of the adjusting wheel, Keep jabbing to get the wheel to move. It's kind of tedious, you don't get much movement per unit of effort.

Mine actually has 2 holes on it which is weird since all of the drums I've seen online only have 1. So I just spin the drum until the hole is near the wheel cylinder then use a small screwdriver to turn the shoes in?

There's a hole in the brake drum. Had a rubber plug in it. Might still be there.

Gotcha, I'll halt the screw hunt. How do I gain access to the area with the adjusting wheel on the back?

Z's don't. No guarantee that the drums will come off even if you back the adjusting wheel off. People have had to sacrifice the drums if they're really stuck. But, the best place to start is the instructions in the FSM. Back off the wheel, see what happens.

So I crank the shoes in and the drum should come off? All of the other car drums I've worked on have a locking screw that needs to be removed first...

Actually...

Were you shipping as a company/corporation or as a private individual? I had wondered if S30.world's paperwork problems were actually tariff problems. I wonder if the guy buying the E30 head had driven across the border to purchase it, would he have had to pay the tariffs? Or how much trouble would he get in to if he didn't declare any purchases. Or called it a personal item. In a way, it is. https://www.cbp.gov/travel/us-citizens/canada-mexico-travel#:~:text=All%20articles%20acquired%20in%20Canada,TTB)%20regarding%20individual%20state%20requirements.

I had similar issues trying to buy parts out of Europe. Specifically Latvia. I needed some BMW fuel injectors and there seem to be a number of NOS BMW parts in Latvia. They couldn't tell me what the final costs would be because of the ever changing tariff situation. In the end I had to source them somewhere else. I am hoping that at some point these issues will get resolved, so business can know the rules and get back to work...

Nope. They're a pain without any lock screws.

Yep the wheels turn fine. Isn't there a lock screw that holds the drum on?

If the brake isn't locked up, and the wheel turns, the likely cause is rust between the axle flange and the brake drum. I'd use a few long penetrating oil soaks and use a hammer to hit the drum between the wheel studs a few times. My next choice would be heat.

Hi all - I have a leaky right rear wheel cylinder and can't figure out how to get the rear drum off and the FSM basically says 'take it off.' On most cars, there's a lock screw somewhere then you just smack the cover and yank it off but I can't find that screw and its driving me nuts lol Anyone have an idea? -chase

But the price of obesity drugs are much cheaper.

Story #2 continued While I was at UPS, those lovely people suggested I try DHL. They “suggested” that DHL seems to be able to get anything to the US with less “questions” and “risks” but the costs would be likely double, Like $400…. So after frank conversations with the buyer, we agreed to go that route. Without saying too much, the DHL experience was easier. Their online shipping app still requires a detailed item description so they know what it is, but the only concern the guy at the drop off center had was that it didn’t contain any fluids or oil. It’s on its way for $418CAD….. And also worth mentioning, the cost story is not complete. For UPS and DHL, and I believe FEDEX as well, the receiver is on the hook for the Duty/Tariff/tax costs before they will release it to the receiver, rather than the shipper like Canada Post, and we don’t know what those costs are. Yet. Will get there in about 3 days. Hopefully he will share those numbers. Conclusion about this experience? Again, unless the need to buy my items is critical, and the buyer has deep deep pockets, I can’t see most US buyers actually buying anything from me.

We’d need the @Yarb inator to help us with the electrons.

Winner winner chicken dinner, we have spark Now im gonna look into some heat sink and stew on where i want to mount it. Time to move on to the fuel system. I know the fuel is toast and the tank will need to be cleaned. I’ll probably start on removing that and see what condition the lines are in. I’m excited!

Apologies to Zedyone. We’ve either hijacked his thread or added a schmit-load of complexity. 😎

Story #2. Big heavy Datsun part. So after story #1, Postal shipping is now dead to me for US customers. As luck would have it, I have an E30 head that a new friend in the US “NEEDS DESPERATELY” for a fair lady restoration. You may have seen the thread here recently. Ok, 60 lbs, big box, 2 ft + long, 9x9”, what to do. Decide to try UPS. On line estimate suggested ~$200 shipping to Ohio. Take box to local UPS Store. Beg for help, plead ignorance An hour later, paper work fill out by hand, much trouble describing the item and finding it correct HS code in the system to describe it properly, having to provide PROOF that the receiver is a US citizen (imagine him having to provide personal documents to a foreigner standing in a foreign shipping business!!!! No f‘ing way!) and FINALLY, being told that If I can’t provide commercial invoices that prove the source and valve of this item that i risk the item being ABANDONED if I try to ship and the US gov doesn’t agree with my valuation or paper work, I walked out without shipping it.

Story One. Shipping a personal gift to family friends in the US. I almost ALWAYS ship postal. Always cheapest, minimal or zero duty or brokerage charges (especially US to Canada shipping) Well, effective sometime in September I believe, there is a duty and taxes pre-shipping cost calculator application that has now inserted itself into the Canada Post shipping process. In a nut shell, shipping anything to the US requires you sign up with a company called ZONOS. This app sits between my Canada post shipping app where I make labels and pay for them, and my printer. I’ll explain. As I make the label, I (as always) I have to describe each items that I’m shipping. Now ZONOS gets in there and determines what specific trade type item each thing is and assigns a duty / tariff / tax amount to charge you. After you clear this hurdle it lets you pay for the shipping and lets you print the label. Now the fun part. First let me say, for Canada Post at least, THE SHIPPER (ME) MUST PAY THE DUTY/TARIFF/TAX, not the receiver in the US. So fine, I need to pass that cost on to the receiver by raising my shipping price. So I have to know what that cost is, right? Well I will know it, but not until I receive my monthly invoice from Zonos. NOT AT THE TIME OF SHIPPING!!! So, am I supposed to say “look, shipping is X$X today, but at the end of the month, I will ask for YY$$ more when I see your duty/tariff costs blah blah blah”. Oh I can’t ship that precious part you need for your restoration for 3 weeks while I wait to see how much that YY$ is and you send that $$. Oh and BTW, that YY$$ is going to be 500 times more than the 2$ part I’m shipping you. Are you a happy customer yet? What’s that, you don’t want that part anymore? Surprise!!!!: So back to specifics. We shipping a couple of hand made baby blankets and a bag of chips (don’t ask) to a family friend in US. Described it as a gift. Shipping costs were $25 bucks I think, but at the end of the month the Zonos invoices added $34 to MY visa. Sorry no more postal shipping to the USA

Good find Cap. I snatched the Gen 2 wiring pic.

So. I have been honored to help many of you here with your projects by shipping parts to you that I’ve accumulated over the years. I’m not a business, I don’t do it to feed my family, I do it help friends with their projects and to maintain my social circles. Recently, and I know I’m not alone, I and my customers have been faced with a massive increase in costs and effort shipping items to the US. I’m about to consider abandoning this service as it appears to no longer be practical. I can’t imagine what devastation is happening to Canadian small businesses who’s customer base is US based. I’ve heard rumbling on FB forums from others about crazy costs shipping both into and out of the US. I’d like to use this venue as a place to share our shipping stories and perhaps what worked better for you, or what services or techniques to avoid. So, to begin, I’ll share two stories that I’ve recently had, to help to both illustrate the difficulties and demonstrate solutions.

A work colleague of mine and I spent about an hour yesterday getting some video of the 240z I restored (got it on the road on Dec 31 last year). Unlike me, he has skills and talent for editing and creating videos. Have a look! https://www.youtube.com/watch?v=nQ3ieeuqjwI

Yep, I read that one and that is what caused my post. I have the oil pan from the turbo motor, and I have the oil pan from the original L24. I can use either, but they both need re-habbing before I can use them. I didn't want to have to re-hab both of them at this time, but I think that is what I'm going to do, as they will both need to be done at some point anyway. Since I have the pan out for cleaning up, I have the ability to modify/change/omit the heat shield from the turbo pan. Can you explain what part interferes with the header? I'm thinking I may be able to retain some heat-shielding of the gasket and still fit the headers? I'm actually considering just using the MSA header I have for now until I can save some more dollars for the ZStory headers and hopefully, the tariffs will expire as well! I've also read that the turbo oil pan may not fit into the 240 because of the sump being in a different spot from the 240 pan, and causing interference with the crossmember, but I haven't been able to confirm that either.