Jump to content

Remove Ads

SteveJ

Free Member
  • Joined

  • Last visited

Everything posted by SteveJ

  1. Carl, when are you going to write the next definitive book on Z cars? Most of the time when I'm trying to find an answer to somebody's question on Z cars, I end up referencing your site. For instance, I used your page on performance numbers drawn from car magazines to refute the argument that the 280ZX was a fat pig compared to the 280Z. Okay, so it might not make you a lot of money, but it would certainly stir conversations within the community.
  2. Yeah, the biodiesel 240Z has been around for a couple of years. The guy who built it sold the car, probably to go do other projects. If you search on ZCar.com, you'll find posts on it.
  3. SteveJ replied to jszarecki's topic in Help Me !!
    Jay, don't worry about the tach reading. Have someone rev the engine while you're taking voltage readings.
  4. SteveJ replied to jszarecki's topic in Help Me !!
    Perhaps it would have been better if I said "overvoltage". In my more Z ignorant times (I'm still Z ignorant, just less so than 5 years ago.), I installed an interally regulated alternator in my car without knowing it was internally regulated. I bolted it in, started up the car, and blew out one of my headlights. OOPS!!! I checked the voltage at the battery with the car running, and it was at about 19 volts. So, I quickly got online, did the research that I should have done in the beginning, and found the solution. Now, if Jay is running the "double regulated" electrical system long enough, perhaps it is causing the electrolyte in the battery to boil, and the overpressure is popping off the battery caps.
  5. SteveJ replied to jszarecki's topic in Help Me !!
    Jay, You said you replaced the alternator, right? If so, there is always the possibility you were sold an internally regulated alternator, especially if you just told the guy at the parts counter that it's a 280Z. The internally regulated alternators started with the 78 280Z. If that is the case, that would cause the overcharging problem you seem to be experiencing.
  6. SteveJ replied to HKSZ's topic in Electrical
    Read this thread for ideas: http://www.classiczcars.com/forums/showthread.php?t=19118
  7. SteveJ replied to jszarecki's topic in Help Me !!
    Jay, pay attention to what Arne wrote!
  8. To truly install a 4 point harness correctly, you'd need a roll cage to mount it on.
  9. Jay, It sounds like you might have an overvoltage situation. Check the voltage at the battery again with the car running and tell us the reading. The tops of your battery would come off only if someone took them off or if pressure built up in the battery (hydrogen gas formation during the charging process). The headlights will also blow out if they get too much voltage. As for your fuses, did you check them for continuity with the fuses pulled out of the fusebox? Steve
  10. Josh, I suggest that you do some research to figure out what you might want to do. Here is the Amazon listing for a book I purchased on turbochargers: http://www.amazon.com/gp/product/0895861356/103-0325839-2372616?v=glance&n=283155&s=books&v=glance. Also search through this site, http://www.zcar.com, and http://www.hybridz.org for information on turbocharging an engine. I doubt you'll find a ready made kit on adding a turbocharger to your existing car. It's not like there's that much of a market to do so. Most people who want to turbocharge their Z find a 280ZX turbo (hopefully a rusted-out car), and pull the drivetrain and wiring harness from that.
  11. Bob pretty much identified your wires for you. You could have a very dirty or bad combo switch. That could account for the dim headlights. My headlights were pretty sorry until I converted them to operate off relays.
  12. Actually the US federal standards specify that air bags be powerful enough to stop a man who is not belted. In other words, they pop out with enough force that they are overkill. (http://www.iihs.org/laws/testimony/pdf/brief_stk_122302.pdf pg 3) Indeed, in American market cars, you will see the acronym SRS on the airbag cover. SRS stands for supplemental restraint system. Frankly, I think that it's ridiculous to design airbags to protect unbelted passengers. If they have so much of a death wish that they do not want to use seat belts, we should just let Darwin take over and allow them to remove themselves from the gene pool.
  13. I bet that would buff right out.
  14. At a minimum, you'll need a 350 from 1976 or later. The smog equipment will have to be accurate for the year of the block, too. Expect to have to go to the referee station, as well. IMHO, "dropping in a V8" isn't the best thing to do on a budget. What kind of budget are you talking about? How much research have you done? Spend the money to get a copy of the Jags That Run book for the Datsun 350 conversion. It may not have all of the answers, but it will give you an idea of what you need to do. Also, IMHO, about any horsepower estimates you get on your questions on modifying your L28 are worth what you paid for the estimate. People can guess, but it's only a guess. Good luck in your decisions.
  15. Check the sockets and bulbs, especially on the left front. My guess is that the left front bulb is out.
  16. You haven't upgrading your alternator to an internally regulated alternator, have you? I know I had problems with running on until I realized I had to put a diode in the charging circuit.
  17. Jason, there are several light bulbs, and they are wired in parallel.
  18. Stephen, shouldn't your circle have been a little more to the right. I swear that I can see the edge of the VIN plate.
  19. Jason, it doesn't truly matter what our opinions are, but I have some suggestions for helping you decide the path you want to take. First, while the gentleman who gave you the advice may be an automotive enthusiast, we have no idea what his pedigree might be. His opinion is worth as much as you paid for it. Having said that, you need to decide what you want to do with your car. Are you looking to restore it? Do you want a beater? Do you want a modified car? Are you thinking of turning it into an ITS car? Knowing the destination can help you decide whether or not to take the journey. Any decent car is going to cost you money. That's pretty much true, no matter what make or model. Set your budget and timeline and at least double both. That will put you in the ballpark. I'm not sure how much damage the thieves inflicted upon your car, but it sounds like you have been confronted with numerous electric problems as a result of their actions and the ravages of time. Consider getting some quotes on replacement wiring harnesses from ZBarn and possibly other vendors. You're willing to pull the dash and tackle other problems. A replacement harness may save you from damaging the car with improvised repairs. I'm guessing from the pictures in your gallery that the car has received some battle damage over the years. Depending upon how detailed you might think of restoring your car, it can be expensive to fix past "repair" jobs. The Z car in of itself is a pretty reliable car. While the L28 you have is not as universal as a Chevy small block, that engine is in a bunch of 280ZXs that may be sitting in junkyards around where you live. Parts scavaging can save your pocketbook. The Z compares well with a Camaro from the same generation. In the book, Datsun 240Z & 260Z Gold Portfolio 1970-1978, there is a copy of an article from Motor Trend magazine (August 1972) comparing a Camaro Z28 to a 240Z. While the Z28 will beat the 240Z in 0-60, the Datsun definitely held its own and then some. The comparison was done 4-speed to 4-speed. Try to find a Camaro without a slushbox and a jacked up price. Don't forget, too, that what you might save in parts for the Camaro, you will probably pay back at the pump.
  20. Have you checked to see if the part is still available through your local dealer? It might be cheaper than buying that one and having it shipped.
  21. First it helps to have a wiring diagram to do the diagnostics. If you don't have a FSM, you can find the wiring diagram here: http://www.atlanticz.ca/zclub/techtips/wiringdiagrams/72_240z_wiring.pdf. If you look at the diagram, you'll see three wires going to each headlight. Two of these wires (red with a white stripe {RW} and red with a blue stripe{RB}) are common to both headlights. The RW wire carries the current to the low beam side of your headlights, while the RB wire carries the current to the high beam side. The key to diagnosing your problem is that you have high beams, but you don't have low beams. This puts odds on that the problem resides somewhere around your turn signal switch. So let's pick up the questions from there. You said you put in a new turn signal switch. Was it a new-old stock (NOS) switch? Who supplied you with the switch? Are you sure it was correct for the build date of your Z? (I'm not sure if there were any running production changes.) Are you sure the pin-outs on the turn signal switch match up to your wiring harness? Did you test for continuity of the pin-outs on the turn signal switch? Did you inspect the wiring harness plug going into the switch? Is the lug for the RW wire still making good electrical contact with the RW wire? (It's not unusual to see some corrosion in the wiring harness. Lord knows, I've replaced many lugs because the wire corroded to the point that no current flowed.) If answering those questions do not solve your problem, you have to dig into your wiring harness. The RW wire makes essentially a straight run from the turn signal switch to the headlights. There may be a plug from the interior wiring harness to the engine bay wiring harness, but since I don't have my FSM handy, I can't say for sure. That could be another site for corrosion. Otherwise, you'll have to look for any place where you or a previous owner have cut into the wiring harness.
  22. When you say almost 99% rust free, where are you seeing rust? It has a nasty habit of hiding. Also, could the repaint have been to cover accident repairs or rust repairs? Examine closely before your bargain becomes a money pit.
  23. SteveJ replied to jszarecki's topic in Help Me !!
    You can take anything apart. The talent comes from being able to do take it apart without destroying it and knowing how to secure the cover when you're done.
  24. SteveJ replied to jszarecki's topic in Help Me !!
    Yes, early on I told you that the procedure to check and adjust the voltage regulator is in both the FSM and the Haynes manual. My suggestion is to read up on it and follow those directions.
Remove Ads

Important Information

By using this site, you agree to our Privacy Policy and Guidelines. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.
; ipsSettings['maxImageDimensions'] = { width: 1000, height: 750 }; const ipsJsFileMap = [];