SteveJ

That one is listed. The OP was looking for a locking cap.

Heck, you should offer him $3000 if the car is in good shape. The guy bought the car for a quick flip, and now he's getting nervous.

Do you happen to know the part number? It's not in the catalog at Carpartsmanual.com

MSA specifically says on their website that the 70-78 locking caps aren't available. This thread describes an alternative, though I don't know how difficult to find. Since it looks like reddat has one listed on eBay, they might be available elsewhere. He does put quite a premium on his parts. Yeah, I was right. It is available cheaper.

Have the positive side (downstream from the switch) on 86 and the ground on 85.

Have you looked through the diagnostics in the FSM? I'd be surprised if it's not covered.

There are still shops that will properly rebuild alternators instead of sending them off to who-knows-where to have them rebuilt. It costs more, but you get what you pay for. Anyway, the trick is finding those shops.

Two clues that the OP has a 280ZX. First, he did say 1980, after S30 production ceased. Second, he's a Kiwi. IIRC, only the North American market received the L28 motor in the S30 body style. If it was an S30 280Z and not an S130, then there would be ways to make things work.

I talked to Guy. The alternator in question was rebuilt. He swapped in another alternator, and it worked fine. I guess that someone did a less-than-stellar job of rebuilding the alternator, probably not getting the field wire hooked up right.

I responded to your PM, but just to share with everybody else... My first thought would be that the battery is undercharged. Think of an ammeter as a flow gauge. Not only is it telling you the volume of electrons flowing, it's telling you the direction of flow. Positive is toward the battery, and negative is away from the battery. I looked through the diagnostics in the EE section of the 72 FSM. It confirms this as one possibility. I kept looking through the FSM and noticed something on the VR diagnostics, too, on EE-26. Excessive output could be from 1. A broken neutral (white) wire. 2. A bad VR 3. Poor grounding of the alternator. 4. A broken ground wire. If you have a multimeter, you can check continuity of the wires and grounds (1, 3, & 4).

I have that type of connector, but I won't have time to get to the post office to send it to you until after the national convention. That said, if no one else comes through, you could try Vintage Connections. Go to the price list and order a HP6N Non-Latching Set. You may want to order extra terminals as well. I have done business several times with Del. He is a stand-up guy.

I also found this link about petroleum jelly and nitrile (See post #7): http://www.candlepowerforums.com/vb/showthread.php?113228-Nitrile-Buna-N(O-Rings)-vs-Petroleum-Jelly(Vaseline)

Vaseline is not compatible with latex rubber. The O-rings are another form of rubber. Latex wouldn't stand up to gasoline, either. If a product holds up against gasoline, I would guess it would hold up to vaseline. Gasoline is an excellent solvent, after all.

Thanks for all of the advice. I received a new O-ring yesterday, and I took much greater care in the re-installation. I cleaned the sealing surface of the tank with a soft toothbrush and carb cleaner. I then applied vaseline to the sealing surface of the sending unit to hold the O-ring in place and lubricate the O-ring. I spread a thin coat of vaseline on the O-ring, too. I eased the sending unit back into the tank and made sure the notch on the sender fit right around the key on the tank. I put the retaining ring on and rotated it with two pairs of pliers to ensure that the ring rotated around it's center. (I had used a screwdriver to push it before.) With my wife watching the tank, I added plenty of gas. There were no leaks. Unfortunately I was able to confirm that my gas gauge has given up the ghost. If anybody has a spare one that he/she can part with, send me a PM. I'd love to get my hands on one quickly.

Sam, I see three loose wires in the picture you posted. Two are black with ring lugs attached and the other is a light color with a bullet connector. Which wire are you concerned about?

Stock bumpers had a rubber strip toward the end of the bumpers, but they weren't end pieces. There is no filler. As for reference pictures, try CarDomain.com.

Are you getting your oil pressure off of the dash gauge or with a mechanical meter at the engine? If you're not using a mechanical gauge at the engine, you might want to try that before spending the money & sweat to make changes.

It looks like the Sun-Moon-Star model was used as a starting point. I have one on my desk at work and one in my home office. Of course, whoever created that missed the biggest feature of a distressed Z. The dash isn't cracked at all.

The bodies are completely different, and I think that includes the major dimensions. You can't just swap parts over. There will be a lot of fabrication and fiberglass/bondo. If any of your mates has a 240Z, take some measurements. Unless you're really good with body work or have access to someone who is, you'll also run into issues when the lines change between the front guards and the door as well as at the bonnet and the base of the windshield. In my 18 years of being around Z cars, I can't recall ever seeing such a swap. By the way, while you may like the look of the 240Z better, you do have better aerodynamics with the 280ZX.

At Zcar.com, the topic comes up from time to time... http://www.zcar.com/car_talk_forum/what_is_this_manifold-naps_831617.0.html http://www.zcar.com/70-83_tech_discussion_forum/l28_naps_896835.0.html Search over there for more info.

Search through the electrical section. I know that I've described the headlight circuit in great detail.

Thanks, Jim. The old ring was a little corroded, but not too bad. Fortunately, I found a new retaining ring in my parts stash a few minutes ago. If I was organized, I might actually catalog all of the stuff I've been accumulating. I did not look at the sealing surface at the tank, though I imagine it's pretty nasty. I cleaned the gunk off of the O-ring with carb cleaner, and it passed my cursory inspection. That doesn't mean it was still up to snuff. Thanks for the info.

I replaced the fuel sending unit on my 74 today. I thought I had a new O-ring, but I couldn't find it. When I removed the old sending unit, the O-ring appeared fine, so I decided to re-use it. I tweaked on the retaining ring a little because I wasn't smart enough to leave well enough alone. It puts plenty of pressure against the fuel sending unit and O-ring. However, when I tried to put in some gas, it leaked at the sending unit. I got the gas level below the sending unit and worked on it some more. I think the first time I put the ring back on it may have slid over to the side some and not remained centered in the opening. I put the ring back in place again, carefully ensuring the ring was centered properly. A friend slowly added gas, but the leak remained. I went ahead and ordered a new O-ring and retaining ring from MSA. I hope to have it around Thursday or so. I'd like to hedge my bets, though, and ask for input on any other reason for the tank to leak at the sending unit besides not centering the retaining ring or replacing the O-ring. Thank you in advance for any suggestions.

You're welcome, Sarah. Sometimes it's not so bad to pay extra for the correct screw. My two cars have suffered from benign and not-so-benign neglect over the years, so if I can replace someone's kludged it-works-for-the-most-part fix with a proper fastener, it's worth it to me. The link really pays off for finding parts commonalities.

Look at the parts manual link in my signature. Find all of the part numbers. Go to Nissanparts.cc or Courtesy Nissan Parts, and put in all of the part numbers. They will let you buy anything that is still in the system and let you know what is NLA.