seerex

search the treads for rx7 fuel pumps, beandip I think , was the one who used one from a carbed one and had great results, they are rather inexpensive or you can find an another from a regular parts store, you can use a vacume gauge and check your fuel pressure as well, good luck

nice sign even

I had the same issue twice , did it start running poorly just after the choke was turned off < pushing down the choke handle? If so you might have it stuck and that will give you that kind of issue somewhat . Also check the gap in the points as well as the points , acts just like that. Good luck

dead flow easy way to see if its the belt , with car idling spray wd40 or other lubricant onto belt , the the noise immediately goes away there ya go its dry and worn out probably , use the little red straw for this and watch your fingers and don't wear a tie when doing this

19 is a bit high for me, I would say 12-14 tops but thats also a matter of choice and taste, some like them completely original, but also its where it is located that could drive up the price a bit , hope he gets it but don't think he will.

I would try napa or just ask you local parts place that isn't a discount type store and most can get you a specific name gasket if you ask . Probably under 12 bucks

I would try courtesy parts in texas or msa . http://www.courtesyparts.com/ http://www.motorsportauto.com Also check tep they may carry a hight grade set too, i know they carry arp bolts. http://www.racetep.com/ Good luck

The header gasket they send us had always worked fine for me. I fyou read up in threads, i have heard diffrent results but mostly positive. I just recommend cleaning the header flanges where it attaches very well to make sure its a perfectly flat fit. By the way if the intake and exhaust isn't offalready you might want to pick up new studs and bolts with the expectation of breakage.Good luck

Wil , it would be great to have the setup describe to have a week and say 5 grand to make a 12 sec car from a stock 240z without changing motors, that would be neat

well I my back and neck say brake booster but after just now getting the back bumper on from cleaning it my left hand says definately that bumper bolt

Ok I just got done doing a brake booster last week and its a toss up between the top nut on the inside of the car on the right which only will let you turn it 1/4 to 1/8 a turn at a time :tapemouth or the damn passenger side bumper bolt next to the tank which has similar qualities. Anybody have any other favorites?

helps if I put in the link http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7934103497&category=43955&sspagename=WDVW

I know they are Ronals, but they aren't bad looking . Only thing is they are a bit narrow but still look nice and I bet nicer if they were redone. Hope someone here get them. Good Luck

Have you pulled the fuse box and checked the back of it? Also track down the wiring that went to that capacitor. But it sound like he might have a line wire for an amp that might be laying around hot or maybe for some other device cb or such.

Sounds very much like an crossed exposed wire. Sounds like a long day of tracking down wires, did you happent o do anything recently that made it start up or was it just start out of nowhere? Also crazy question but is the ignition fully off?

Paypal wouldn't cover it under their buyer protection?

Hey all I am looking at a set of wheels and they are 4 on 4.5 and the size is 15x6 with a +10 offset. Any ideal how these might look and if would have any fitment issues? If anyone has anything similar to this size what tire might I be able to get on it without rubbing? I was thinking a 205/60 or maybe a 215 /55 . Wasn't sure. Thanks

hello all, found this site in my great search for nice pedals for my 240z, I have been looking for a non universal kind , something that really made a nice touch instead of a statement of bad taste. Hope someone can use the info http://www.ultimatepedals.com/

I have had assorted colors with my z's, I love the brg though i have not had the pleasure of owning one that color, mine have been white red yellow and silver, presently my 71 will be going from guards red <porsche color> to a brighter 2003 Ferrari Rosa Corsa , and I wish I had the money to make my 72 Lime green , but more green than the factory 112 color more like mopar sublime green. I researched alot and did alot of thinking , as should I stay stock color or also if I changed it what would I like for a long time , look in the gallery and see what strikes your fancy , good luck

Thanks Ed , wasn't gonna get a header this soon but they have the coating for $75 <normally 149 >now til mid january one of the msa guys says and kinda motivating me

They have a sale going on now on their Aerospace Thermal coating for headers, does anyone know if this is jet-hot or if not who does this for them? Also anyone have any feedback if they bought a header with this coating? Thanks Jeff

you are correct Carl , same thought you just used the right term , very good point with the clutch arm and the pedal

yea the gene pool needs a bit of chlorine , I find it very disgusting how many people seeks ways to avoid work and get paid for their own stupidity , still think having people get a permit to reproduce is a great ideal

just a guess here but I thought it was too keep the tires cool , with more air in the tire it was able to reduce the heat easier than a tire that contained less overall air

if the car moves forward and the clutch pedal is pressed in, its not engaging fully and very well could cause the grinding