rudds67's Content - Page 2 - Classic Z Car Club Skip to content

rudds67

Community Member
  • Joined

  • Last visited

Everything posted by rudds67

  1. hi, i put some mystrye oil in the crank case and some gas treatment in.. now it is smoking ... the color of the smoke is white.. so its the gas right..? as i rev it up>> it smokes out a ton and some comes from the engine conpartment... also its leakin oil from some where... i jacked it up and it was driping from the exhouast pipe connector that runs in to the header... ithink is driping from some where on to that.... my dad said its not B/C of what i put in it.... but idk.....#@#$? steve
  2. hi, befor i did anything the engine was running fine.... i put some mystrye oil in the crank case and some gas treatment in.. now it is smoking ... the color of the smoke is white.. so its the gas right..? as i rev it up>> it smokes out a ton and some comes from the engine conpartment... also its leakin oil from some where... i jacked it up and it was driping from the exhouast pipe connector that runs in to the header... ithink is driping from some where on to that.... my dad said its not B/C of what i put in it.... but idk.....#@#$? steve
  3. hi, i put some mystrye oil in the crank case and some gas treatment in.. now it is smoking ... the color of the smoke is white.. so its the gas right..? as i rev it up>> it smokes out a ton and some comes from the engine conpartment... also its leakin oil from some where... i jacked it up and it was driping from the exhouast pipe connector that runs in to the header... ithink is driping from some where on to that.... my dad said its not B/C of what i put in it.... but idk.....#@#$? steve Long live the Z
  4. hey.. Itook it off and put a battery to it and it worked,,, i know theres a fuse for it but is there anything eles that could stop it from working.. thanks.., steve Long live the ZROFL
  5. hi, I have the glove box door . what i need is the box,,im pretty sure there is a light in it cux theres a lot of loose light bulbs on wires where the box is sopose to go..thanks... steve Long live the Z
  6. hi, does anyone have a glove box laying around that they would consider selling? i ordered a bunch or parts for my z from victoriabritish but they dont sell glove boxs for the 240z's . can anyone help me out..? steve
  7. hi,, is it allright to bypass your eletric fuel pump. I have a 240z 73' and it seems that the pump is not beeing turned on... thanks.. steve
  8. hi. theres a locking key switch under my ashtray on my 73 240z... what is it used ofr.. i replaced the parkin brake and i saw that the wires are cut that go to it.. thx, steve
  9. thxs for all the help.... but i got them out by drilling through the top frame rail. it was the only way it would work. i drilled through then i used a screwdriver and a hammer to nock it out... steve :dead:
  10. I have goten almost all of the old parking brake cable off my 73' 240z and i finally got the propellershaft off too.. The part where i am stuck is the connectors that hold the parking brake cable to the car. there are 4 of them. 2 are next to both rear drums then theres 2 more up inside the tunnel area where the cable gets latched on by the y piece connector. I got the first 2 off next to the wheels but I can get the last 2 inside the tunnel. How do you do it? Is there a special way or tool that you have to use? I got the first 2 out with a screwdriver and a hammer. I cant use that up inside the tunnel.. any ideas would greatly help... I have a week to get this car on the road. thanks for your time . steve Report
  11. i, I have goten almost all of the old parking brake cable off my 73' 240z and i finally got the propellershaft off too.. The part where i am stuck is the connectors that hold the parking brake cable to the car. there are 4 of them. 2 are next to both rear drums then theres 2 more up inside the tunnel area where the cable gets latched on by the y piece connector. I got the first 2 off next to the wheels but I can get the last 2 inside the tunnel. How do you do it? Is there a special way or tool that you have to use? I got the first 2 out with a screwdriver and a hammer. I cant use that up inside the tunnel.. any ideas would greatly help... I have a week to get this car on the road. thanks for your time . steve
  12. Hi, I have goten almost all of the old parking brake cable off my 73' 240z and i finally got the propellershaft off too.. The part where i am stuck is the connectors that hold the parking brake cable to the car. there are 4 of them. 2 are next to both rear drums then theres 2 more up inside the tunnel area where the cable gets latched on by the y piece connector. I got the first 2 off next to the wheels but I can get the last 2 inside the tunnel. How do you do it? Is there a special way or tool that you have to use? I got the first 2 out with a screwdriver and a hammer. I cant use that up inside the tunnel.. any ideas would greatly help... I have a week to get this car on the road. thanks for your time . steve
  13. hi, I paided 1200$ for my z. its a 73 240z . ya it has rust and a little bondo but is runs good. and let me tell you , it is really fast.. good luck steve
  14. hi. I just fixed my fused box on my 73' 240z but the head lights are still out.. the blinkers and the flashers still work.. the box had a melt down so i fixed it with that moldible tube epoxy. did i do anything wrong? thanks, steve
  15. hi, Yea i know that the heads cant move there locking but i still cant turn the nuts ... how do you.. is there a special way to do it, thanks steve
  16. hi. I am in the process or installing a new Handbrake cable on my 73' 240z . I have removed the old one up to the linkage but i cant get it off cuz the propeller shaft is in the way. I have a haynes book and it says that you must remove the shaft befor replacement of the cable . it says theres 4 bolts but i cant get them off. there facing the wrong way and there seems like theres not enough room to turn it. a can get a box wrench on it but i can pull as hard as i can but it doesnt move. it was started to strip s o I stop . Does anyone Have any ideas ? i need all the help i can get. A close friend is coming up soon and i would like to have the car ready to drive by then... thanks for your time... Steve
  17. typo.. theres 4 bolts on the shaft but they wont move
  18. hi.. I need to remove the propeller shaft to help me on installing a new parkinbrake cable. i cant remove it . thers only 2 bolts but they wont move.. thanks, steve
  19. rudds67 replied to goose's topic in Help Me !!
    hey , is it worth putting on a set of dual dgv 32/36 webber carbs on my 73' datsun 240z. i thought the carbs were running bad so i bought a set of the webbers for it but the cards seem to work ok. should i still put them on?
  20. hi. I am in the process or installing a new Handbrake cable on my 73' 240z . I have removed the old one up to the linkage but i cant get it off cuz the propeller shaft is in the way. I have a haynes book and it says that you must remove the shaft befor replacement of the cable . it says theres 4 bolts that you " Just Unscrew " but i cant get them off. there facing the wrong way and there seems like theres not enough room to turn it. a can get a box wrench on it but i can pull as hard as i can but it doesnt move. it was started to strip so I stop . Does anyone Have any ideas ? i need all the help i can get. My Girl friend is coming up soon and i would like to have the car ready to drive by then... thanks for your time... steve
  21. hi. I am in the process or installing a new Handbrake cable on my 73' 240z . I have removed the old one up to the linkage but i cant get it off cuz the propeller shaft is in the way. I have a haynes book and it says that you must remove the shaft befor replacement of the cable . it says theres 4 bolts but i cant get them off. there facing the wrong way and there seems like theres not enough room to turn it. a can get a box wrench on it but i can pull as hard as i can but it doesnt move. it was started to strip s o I stop . Does anyone Have any ideas ? i need all the help i can get. My Girl friend is coming up soon and i would like to have the car ready t odrive by then... thanks for your time... Steve:D :D
  22. Hi I need all the help i can get.. I have a new parking brake cable for my 73' 240z.. but in order to install it you have to take off the main drive shaft,,( thats what the book said) well icant get it off.. theres only 4 bolts but there facin back . you cant get a socket on it . ican get a box wenck but i i still cant turn it.. im ending up stripin it and i dont want to do that,. Does anyone have anyidea.. my Girlfreind is coming next early next month and i want to get the carr ready to drive by then... thank your your time, Steve :classic:

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.