bartsscooterservice

Hello George ! Nice to see a fellow European :classic: Good luck fixing her up

You can put the spark plug in the lead hold ( or put ) it against some metal part of the engine and check for a clear blue spark when you turn the key. I think it's the injector that's clogged, or the injector is not getting voltage to open up and let fuel pass it into the combustion chamber. Maybe you need a set of new injectors ?

No way I would give 120k for that, but some people seem to do, there's a few fish that will bite.

Last time I did it, the car was in front of the garage on the driveway... just open up the hood, slide the container under it, and pull the hose when the engine is cold. I use a plastic cat litter, like this one, works great : http://www.thepurrcompany.com/images/shop/large-cat-litter-tray-large.jpg

That's what I always do, not messy at all. Just put a large enough container under it. The drain plug on mine broke of to, I ordered a NOS one, put it in, and left it alone, I drain it by pulling the lower radiator hose.

I see a dash cap, non original air filter and hose that goes to the original air filter, engine bay not the same color as the car, rear panel painted in the color of the car, seats have been upholstered ( not the original leather look ). No pictures of the underside ?

At least you still have a choice on non ethanol.. I only seen that in Germany here across the border. Here everything regular contains 5% ethanol in it. I hope it doesn't effect the fuel system and carbs to much.

I agree with Carl, maybe something like this would be a better choice ? Datsun Z Series 240Z | eBay

It's always good seeing another one saved from the wreckers ! Way to go Chris...

Haha yeah no problem, If I find something usefull I'll throw it on here for other club members...

I noticed I don't have a fuel smell anymore with the windows down, since I replaced the filler neck and hoses on the tank.

That's alot and it's a 73 also, not totally original , but would they actually go for that amount ?

mmmm...that's alot more.. maybe here it will go for 14 to 15k. Maybe it also depends on how populair the car is in that country ?

Datsun Z Series | eBay

bad fuel ? Check spark, ignition timing and fuel supply first. Are the carburetors not overflowing ?

There are just a handfull of early Z cars here in The Netherlands. It was not that populair here then in the United States back then. My dad had one in the 70's here, and he said he almost never saw another 240Z back in the days here..

I really have no idea , Japanese classic cars still don't seem to hold much value here, maybe the same situation as in the US ? I see Mustangs and Corvette's going for much higher prices, even a " project " will go for 8 to 10 k euro. I went to Stolze last time, and they asked 16k for a '' project '' C3 corvette from 1972 :S Don't know about othern Western countries, but I don't think much of a difference. It's going to get the roof removed and new paint this winter, which is now a minus factor if I would sell it, which I won't haha. We do have a new classic car rule here since last year, anything over 40 years old doesn't pay road tax, so cars from 1974 or earlier will be worth more here.

The center caps on the 280ZX wheels where all gone, I bought new ones from total z parts, after some bargaining I got them for a good price.

Look up my post 39 in that topic. These are perfect and are not expensive, I got them at an Industrial rubber seal supplier. It just a clamp on seal, push in place.. only the ends need to be glued together.

Sometimes you just can't get it loose what ever you try and have to replace the part. It's amazing how stuck things can go.. I had to use a 4 meter pipe on an m16 nut last week to break it free, my heaviest impact wrenches of 1200nm couldn't break it free.

It that case it seems normal and there's nothing to worry about ?

I found this topic, I think'everythings good to go http://www.classiczcars.com/forums/engine-drivetrain-s30/38503-240z-temperature-always-over-half.html

great progress ! I would use a bottle of mequairs ultimate compound and some towels, spent an afternoon polishing it up, and that paint will look way better , worked great on mine.

I think it's fine, there's some resistance in there, it stops quickly when I spin it with my hand.

Oil looks good on the dipstick, exhaust does not smoke as far as I can see. It does cool a bit more now. At least it does not run so hot anymore, like when I had 2 days ago. Where does the temp needle on the dash meter normally stay ? In the middle ?