Everything posted by conedodger
-
Just Another Damned Z Car Project Thread
All buttoned up. Went to the hardware store and bought a load of fasteners, As you can see, I still don’t have the fastener for the cold start injector block-off. @Yarb was right, I got it from ZCar Depot. It’s thick, and the fasteners I got don’t have any teeth. They touch the threads but no joy.
-
Just Another Damned Z Car Project Thread
John, I’m saving your trip for the electrons. 😮
-
Just Another Damned Z Car Project Thread
Thank you @SteveJ. I’ve been told by my machinest that my stock, albeit extrudehoned intake is a choke point. Like most of us, I should be happy with it runs great and it’s 52 years old, but we can’t leave that alone can we! 🤪
-
Just Another Damned Z Car Project Thread
Update on the 4 post lift. It will be delivered Thursday the 15th. It will take a while to erect as my help went back to New York on the third, but… it will be here.
-
Just Another Damned Z Car Project Thread
So, down the road, after I’ve gotten things running the way I’d like, I’m thinking of going to ITB’s. But, I’m committed to DBW. I removed the pivot for linkage from the firewall so I’m all in. When I go to ITB’s, how do I control three throttles?
-
Just Another Damned Z Car Project Thread
Thanks! Order placed!
-
Just Another Damned Z Car Project Thread
Good! Because I just looked at the Godzilla blanking plate and there ain’t no way!
-
Just Another Damned Z Car Project Thread
Need a little help from my obsessively cataloging Z brethren. I am likely going with an iBooster so I will not be pulling vacuum from the intake manifold. Has anyone cataloged the hole sizes? I need to source aluminum plugs. Also, I drew up a blanking plate for the cold start injector port. But, I recall someone has already made one. Godzilla?
-
Let's show vintage racing pictures. I'll start.
-
Just Another Damned Z Car Project Thread
So, with two perfect gaskets, I bolted the DBW throttle body up to the N42 manifold. I’m short a stud. I know most of you would have seen that and just let it go, but @Yarb is a brutal task master and he would have given me hell for not fessing up…
-
Just Another Damned Z Car Project Thread
In more news, my Katool 4 post lift should come in the next week!
-
Just Another Damned Z Car Project Thread
I’m pretty golden in 2D in AutoCAD. Pretty sure I’d need help with any 3D design.
-
Just Another Damned Z Car Project Thread
Finally, I printed them on the gasket material. Perfect match! Next project is to make a blanking plate for the cold start injector. I’m not going to use that with the Haltech. Cold start enrichment can be programmed in. They look pretty good don’t they?
-
Just Another Damned Z Car Project Thread
-
Just Another Damned Z Car Project Thread
Ok, exciting news. Well, exciting for me anyway. It was a steep learning curve, getting a whole lot less than fluent, but sufficient in AutoCAD. I drew up the gaskets necessary to attach the throttle body spacer to the stock 280Z intake manifold. I then converted them to SVG files and printed up the gaskets on plain paper (gasket material is more expensive and I don’t have a lot of it hanging around).
-
Let's show vintage racing pictures. I'll start.
-
Let's show vintage racing pictures. I'll start.
-
Let's show vintage racing pictures. I'll start.
-
Let's show vintage racing pictures. I'll start.
-
Let's show vintage racing pictures. I'll start.
-
Let's show vintage racing pictures. I'll start.
-
Just Another Damned Z Car Project Thread
Oh, and this came today. PTunerz thermostat housing. Had to bolt up a Canadian part in honor of my Canuck brothers…
-
Just Another Damned Z Car Project Thread
So, having solved the problem of a bridge between the Bosch DBW throttle body and the native 280Z intake, I need to make gaskets for the bridge. I tried successfully to hand cut gaskets with an exacto knife and a cutting mat using gasket material. It would work, but it isn’t as pretty as the project deserves. So I bought a new in box Cricut Maker 3. This willl cut leather, so gasket material is cake. I need to draw it up and convert it to an SVG file but I will post picks of finished gaskets.
-
The time has come for Zedyone to really look at brakes.
Pet peeve though, it isn’t a Tesla brake booster. While Tesla does develop some of their tech. Most of it, they buy. Honda used this tech 2 years before Tesla. My wife’s Lexus has self driving tech as well. I didn’t know it was there, and it freaked me out for a second when I first drove her SUV. I put it in cruise control on the highway with a destination input in maps. I felt it pull a bit as I approached a curve and looked for a TPMS warning. All good. Then, I realized it was driving me! You have to put your hands on the steering wheel once every 30 seconds or so. Something I believe Musk is living dangerously with. So, I think I will do this on my car since I don’t need a redundant input from the brake pedal.
-
The time has come for Zedyone to really look at brakes.