Leaderboard
-
Mike
Administrator3Points23,044Posts -
wheee!
Free Member2Points4,607Posts -
grannyknot
Free Member1Points5,158Posts -
240260280z
Free Member1Points5,426Posts
Popular Content
Showing content with the highest reputation on 12/26/2019 in Posts
-
1 pointTry loosening the hinges, push the hood down, and re-tighten. It worked for me. Good luck. Cheers, Mike1 point -
1 pointI run the Rota RB's Gunmetal w/polished lip 15X7 +4 offset. I used the Gorilla small diameter black chrome lugs. Can't speak to the 215/60 R15 tires, I run 205/60 R15 tires which are almost identical tire height as stock so my speedo is pretty accurate and no tire scrub at all.
1 point -
Max VA = power = Voltage * Current = 2.5V * 6000A = 15,000VA Max kVA= VA/1000 = 15kVA1 point -
1 point -
1 pointHope you all had a great holiday! I didn't have a chance to log in much this year due to family and travels..1 point
-
1 pointYou couldn't go wrong with that one, it has been taken care of by Banzai Motorworks so that will cost a bit more but will still probably sell in the $14,000-17,000 range.1 point
-
I’ve used copper end caps with a piece of copper pipe soldered in and a jubilee clip to great effect. The PO had used the bolt method which had corroded a lot reacting with the coolant. The copper method works a treat and totally heat proof! https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F1216656679561 point -
1 point
-
1 pointBecause we buy most of our parts from the states. Our dollar is worth 30% less than yours so if we both make $50,000 a year, you actually have 30% greater buying power. Top that with ridiculous shipping fees, taxes, and brokerage and we end up about 40% more cost in restoring a car. That’s life.1 point
-
Typical mainland Chinese... looks like a cap, feels like a cap but it ain't. It's a polished turd that fakes a real cap. Mainland China specializes in this and they are very good at it. Now that their economy is cooling, they are using even more watering-down methods. Now I avoid everything I can from China or labelled "imported for". For your problem, use non-chinese hose ~ 4" and 2 hose clamps. Stick a stainless bolt in the end and clamp it.1 point
