L20b Cody's Goon

[dutchzcarguy]

8 hours ago, Patcon said:

Does anyone have any advice

Turn it over without the ignition on.. until you have oil on the cam.  (You can also take some oil out the engine and put it all over the cam.. but that's more work)

then.. what Grannyknot said. 👍

[siteunseen]

A "duh statement" but don't forget a hose pipe in the radiator with the drain valve open. Tom monroe's book.

[Patcon]

Cody worked on the parking brake some more. We figured "while we were at it..."

So he took it all apart. He bead blasted the black parts. We didn't paint them yet because it's been so cold.

He did buff out the brake handle

Finished

Didn't get the teeth totally perfect but I think it will be ok

Used a little Boeshield to protect it

[Patcon]

I did some polishing on Cody's headlight rings

This took about 5 minutes

 

Edited January 28 by Patcon

[Yarb]

Looks really nice. Great work friend 

[Patcon]

Thank you.

I was mainly testing technique. I will leave the other 3 for Cody 😉

[Yarb]

Be sure to pass on the technique!!😂

[dutchzcarguy]

I would put those rings on a old headlight! Much easy-er to work and the polish machine can't break the part so easy. 😉 (Something that often happens when polishing small parts..)

[Patcon]

So the other day Cody came over and we reassembled his wiper mechanism

Now I just have 3 more to do...

[Patcon]

Cody worked on the parking brake some more. We made some bushings. We took bushings and turned the outside down on sandpaper using a long sandper roll on an arbor and then we made to enlarge the ID to make them work. He also put a end on the cable

\

He lost one of the clevis pins. Luckily his dad is a hoarder and had a freshly plated one that I made him a deal on. 😉