$60 bucks.

https://www.google.com/search?q=Standard+Motor+Fuel+Pressure+Regulators+PR124&rlz=1C1BOFA_enUS494US494&oq=Standard+Motor+Fuel+Pressure+Regulators+PR124&aqs=chrome..69i57j69i60j69i61l2&sourceid=chrome&ie=UTF-8

17 minutes ago, siteunseen said:

$60 bucks.

https://www.google.com/search?q=Standard+Motor+Fuel+Pressure+Regulators+PR124&rlz=1C1BOFA_enUS494US494&oq=Standard+Motor+Fuel+Pressure+Regulators+PR124&aqs=chrome..69i57j69i60j69i61l2&sourceid=chrome&ie=UTF-8

Thats the 75-77 one.

Site - Thanks for the input.  I searched for Ultra Power p/n UPR PR8 and they must have discontinued, no luck. I guess I'll just keep searching or maybe even try blocking off one of the pipes on the 280Z FPR.

You're right, I can't find it now.  That $96 one from rockauto.com is the cheapest I can find.  Good luck Sir.

13 minutes ago, rcb280z said:

Thats the 75-77 one.

You are right!  My eyes have been looking at the boobie page and seeing twos of everything.

Haha! Me too!

Chiefmd, I can't believe how much these things have gone up in price! Personally if what rockauto has is correct, Bosch, I would get it. JMO. 

Me neither. I can't believe that all the aftermarket manufactures have stopped making it and the one's that are available are ridiculously priced. I did find a used one for $50 but I'm a little hesitant as it is 35 years old.

I guess I'll just have to bite the bullet and pay up ?

18 hours ago, chiefmd said:

 try blocking off one of the pipes on the 280Z FPR.

Most EFI systems from the 70's and early 80's run at 36 psi.  2.5 bar, in European terms.  BMW, Volvo, Saab, Mercedes, etc.  Might find a cheap one you can retrofit that way.

Closeout!  $15.  Will require some fitting.

https://www.rockauto.com/en/catalog/toyota,1982,celica,2.8l+l6,1278402,fuel+&+air,fuel+injection+pressure+regulator,6124

On 10/12/2018 at 1:17 PM, chiefmd said:

Me neither. I can't believe that all the aftermarket manufactures have stopped making it and the one's that are available are ridiculously priced. I did find a used one for $50 but I'm a little hesitant as it is 35 years old.

I guess I'll just have to bite the bullet and pay up ?

Same think with ZX brake calipers as of 6 months ago. Non of the big parts houses had any, RockAuto only had just one side for the rear for the longest time, and the bleeders are pretty worn out.