zject
Free Member
-
Joined
-
Last visited
-
If you are using a K&N air filter you can go to their site and get air flow specs for their filters by the square inch. For other brands of filter the flow might be different.
-
Original Nissan hood bumpers still available here: https://zcardepot.com/exterior/bumper/hood-bumper-stop-adj-oem.html
-
M6 X 1.0 thread size
-
https://zcardepot.com/fuel/gas-tank/fuel-tank-rubber-strap-isolators-240z-260z-280z-70-78.html?search=fuel+tank
-
Great pattern part! Make sure someone gets all the specs on that before you use it!!!
-
Might be a good idea to remove that metal "filter" (could be clogged) that is attached to the pump (if possible) and just put a barb on there and run the separate clear fuel filter alone.
-
-
I am showing (2) M10 X 45 and (2) M8 X 20 per ball joint.
-
Is this the part your looking for? https://zcardepot.com/suspension/rear-suspension/rear-transverse-link-brace-stainless-240z-260z-280z.html These brackets are prone to cracking at the bend. I welded mine up, but a gusset would be a good idea too.
-
Here are the washers in stainless steel: https://zcardepot.com/suspension/rear-suspension/lower-control-arm-rear-stainless-washer-240z-280z.html
-
The New Nissan wood shift knob does not match up to the originals very well. Here is one I bought that is very nice quality and available for 4 & 5-speed. Might even have the inserts avail separately. https://zcardepot.com/driveline/transmission/shift-knob-wood-4-and-5-speed-510.html?search=shift+knob
-
OEM switch cant be beat, $36.99. But I have had good luck with aftermarket also. https://zcardepot.com/electrical/switches-and-relays/reverse-back-up-light-switch-oem.html?search=reverse+switch