siteunseen

Your right, the screwdriver poppers haven't found it. Glass looks good, that's an easy double your money buy. Get it Zed! Come over to the "tin can side". We're going to the moon wearing Reynolds aluminum foil wrap.

@Lazeum I can't get to the members map from my phone? but see if you can and see the other French owners. They can tell you.

I think you could claim it as the last $1,500 240Z and hang it from the ceiling like a pinata.

Okay I'm sorry. We are talking about a specific air filter. Please don't change the original question. Thanks

I don't know! I'm sorry for that too. What I'm remembering, at the moment, is @jalexquijano found that somewhere on the internet for the fuel rail. He has some hot restart issues. Could be an old Redline "Datsun" cover? Looks similar to the milling and filter material on some triple 40 webers I had. When I get back to my lap top I'll dig further. Does this look familiar @Zedyone_kenobi?

That beautiful 240 will grow on you. I never drive my 280 anymore. Now I understand why Harley guys like the hardtail bikes so much.

here's my attempt at helping/explaining with some measurements and the hardware I used from Lowes.

Me too! Then I put one foot on the floor and it stops.

It would be hard to make one look as good as your's Chas. OP, I've done my front bumper but the rear is gonna be a bite that I'm not take. It's a lot harder than the front so I told myself I needed the protection of the rear bumper. There's some dipstick driver's around here. 240 bumpers on a 280 look fantastic without the cost of a 240, better ride too.

PCV? Edit: that's a shopvac hose I think so I made a sucker guess and was way off.

A turbo ZX with an automatic was fun back then but I hated the n/a autos. They were 1, 2 and D but the speed limit was 55 mph. ,

Those things work great. They do look like they'd be easy to make the only thing is that plastic collar's size. The other screw just has a piece of clear tubing on it. https://zcardepot.com/products/choke-lever-mounting-plate-reinforcement-240z

Here's some good threads on doing that. That first one, the TECH article has a great write up from Arne. https://www.google.com/search?q=automatic+to+manual+transmission+classiczcars.com&rlz=1C1BOFA_enUS494US494&oq=automatic+to+manual+transmission+classiczcars.com&aqs=chrome..69i57.17286j0j7&sourceid=chrome&ie=UTF-8

It was a great picture I won't forget.

Just make sure the plug in is the same. The early ones have a bullet type plug, later is a plastic 2 or 3 way.

Yes. Lefty loosey...

Fantastic looking car! Alwzys has been too, I remember the photo in front of that glass building,PPG maybe? Also PPG paint?

Does it do it constantly forward or backwards? Usually a u joint will pop when you yank the tire back and forth. You might find a grease zerk on the u joints, also?

That's some cool stuff you can do and see. You can shut it down with your phone? Incredible technology.

Old I know but here's a pic thanks to Hoover, @240260280

@Captain Obviousfill in again today. Check to make sure you don't have some type of debris around any of the rotating stuff. I've heard plastic bags, pieces of wire etc. getting on the drive shaft, in the u-joints, wherever, makes a sudden noise.

Yes. They're the male end. The sender is. Hope that fixes it! If you're gonna buy some I'd get that thick pink tape. I love that stuff better than the thin white.

I've put teflon tape on my oil senders. No leaks.