Britt Boyette's Content - Page 2 - Classic Z Car Club Skip to content

Britt Boyette

Community Member
  • Joined

  • Last visited

Everything posted by Britt Boyette

  1. Britt Boyette replied to spudz's topic in Racing
    What class is the car that is being built by Dr Sideways? Britt
  2. After rereading the other postings in this string, I saw the GTO was the Ferrari that was being discussed, not the Pontiac, DUH! I should to not try to read these things when I'm dead tired. Britt Boyette
  3. That's all good stuff but, I want a rotisserie. If anyone has one they would like to loan out for a month or two, let me know. I've got most of that other stuff and the welder is coming. Britt Boyette
  4. The GTO's had lots of HP and some of the worst brakes I have ever seen. If anyone here ever decides to get one, spend the cash to upgrade to big disk brakes and upgrade the suspension. I've driven buses that handled better! As for the mighty Delorean, they are fun cars to drive and I think the only weak spot was the PRV V6. The trans came out of the Renault Fuego but worked very well. They flipped the crown gear on the gear box so it could be mounted backwards in a Lotus Esprit style frame. On top of the frame went a fiberglass body tub and on to that, they hung the stainless steel body panels. The car was not overweight. If you ever get the chance to drive one, take it! Britt Boyette
  5. You think buffing out the stuff is work? That's not near as bad as trying to keep it looking that way. That can be a full time job. Britt Boyette
  6. What is your backspacing on the rim? Britt
  7. Have you contacted the place you bought them from? They may know what the problem is and warranty it for you. Britt
  8. Blessed are they whom are born without self awareness, I aways say about people like that. Some of these kids don't have a clue but the ones that do are our future and alot of them are sharp as hell. See where common sense got you? You can't let crap like that eat you up. I would laugh and roll with it and say sure, I got your muffler, but it will cost you. Britt Boyette
  9. I noticed that in the rule book for SCCA Solo in the FP class which is what my goal is, they show minumun weights for all the cars and the 240Z gets to weigh in at 1900lbs. The 260Z gets to be 2000lbs, the 280Z and 280ZX get to be 2100lbs, and the 300ZX(Z31 and Z32), get to trim down to 2300lbs. It's like they are trying to even them up with weight breaks. The class alows you to totally strip the car down to nothing and use fiberglass fenders and hood if you wish. It also allows you to run 16X10 rims with slicks and do a number on the engine/ drivetrain. It's a great class to run my barn car in. Britt Boyette
  10. Britt Boyette replied to zr240's topic in Racing
    Your running 16X10's? What is the back spacing on your rims and tire size? I was looking at the rules for the class I want to run and that rim size is the max I could run. I also have to keep my track width to 64 inches. Thank you, Britt
  11. Why would you rule out the 260Z? Britt
  12. I am setting up my 260Z for racing and I'm planing my cooling system. The question is, on the right rear side of the head, there is a water outlet fitting that appears to go to the heater core. Can this be capped off or does it have to run back to the block at the lower radiator hose/ engine block connection? Britt
  13. I checked out Japco's web site and they don't list anything for a Datsun Z. Do you have some inside info on their inventory? Britt
  14. Britt Boyette replied to zr240's topic in Racing
    That's one nice car! What's your wheel and tire sizes that your using that require fender flares? Britt
  15. As I'm only going to use this car for racing in Solo 2, this swap might not be nessasary. If your brakes were good for 6 hot laps at Queensland Raceway, they should be good for a minute or two of Autocross action with really good pads. What do you think? Britt Boyette
  16. The hammer action worked. I did put on the lug nuts as a drum catcher and that worked out well too. I seldom use a big hammer for working on cars but it sure is nice to have one when you need it. Thanks all, Britt Boyette
  17. Well, after much cussing and fussing with those rear brake drums on my 74 260Z, trying to remove them, I've deceided to ask for help. I followed the Haynes manual and that didn't work. I backed off the shoes adjuster wheel all the way, disconnected the E-brake, used Liquid Wrench (lots!), tried heating the drum with a torch, and a little hammer action (no fins were hurt). What have I missed? Also, is a rear disc brake set up from a 280ZX a direct bolt up to my 260Z? Britt Boyette
  18. I was looking at some of the performance figures for these two engines and noticed the 240Z seems to have a better engine as far as the numbers for horsepower and torque are concerned. Why is this? Don't they share most of the same parts? Also, if they share the same pistons, where do they make up the longer stroke of the 260Z crank, in the rods? I have a 74 260Z with the E-88 head and the round top carbs and I'm always wondering how to get more out of it. Cam and headers are first on the list. Britt Boyette
  19. Tell me more about this swap! Which years and model are they from and what do you have to do to make them fit and work? Thanks, Britt Boyette
  20. I have a 74 260Z that I would like to run in FP in Solo 2. The rules allow for quite a bit of modification. I am looking at making the weight right at the minumum of 2000 lbs. If I were running a 240Z, I would be able to go 1900lbs. You can also run up to 16X10 inch rims and add flares to the wheel wells if you want to as well as triple Webers, big cam, and glass body panels except the doors which may be lightened. If I went to the EP class in Solo 2, the car would have to be set up like a SCCA Club Racing E Production car which is more restrictive as far as set up goes. I'm starting out with a running, rust free, "Barn car". It needs everything no matter which way I go, racing or restoration. I'd rather race. Britt Boyette
  21. What do you have to do to the body to get it down to 2000 lbs with a roll cage? Britt Boyette
  22. Thanks, that baby's outta here! Britt
  23. What happens when you try to run without the throttle opener with the Hitachi HJG46W (round tops) carbs? I have a 74 260Z and I'm looking at different mods like getting rid of the EGR and the air injection system along with the throttle opener. Britt Boyette

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.