conedodger's Content - Page 3 - Classic Z Car Club Skip to content

conedodger

Community Member
  • Joined

  • Last visited

Everything posted by conedodger

  1. Well, you know what’s going to happen. You’ll get the car back together, back on wheels, start it up, back out of the driveway and it will collapse on its belly pan because you never found out where that bracket goes! 🤣
  2. Probably never as far as “stop that”. Human nature is to categorize things. While there might not be an official ‘series 1,2,3, there is a human construct that some of us here have to create a differentiation.
  3. Rick says he thinks he has what he needs. I will let you know if he needs more. Watch this thread for the result as well! Thank you so much!
  4. I think it’s covered @87mj but in case It isn’t, where are you located? Rob
  5. Rick sent me pictures of the damaged areas this morning. It certainly appears to me that the unibody is slightly tweaked. He has a cellette bench so that can be resolved. He wants pictures of these areas if you have them.
  6. Pictures of Keaton’s car in front of Rick’s house on Lake Superior and of the damage.
  7. A month or so back, a picture of a very nice series 2 Z popped up on one of the million or so Z pages on Facebook. The car looked very original and the owner, Keaton, was heartbroken, he had been lightly tapped from behind and the body shops he had talked to were calling it ‘likely totaled.’ He lives in Indiana or Illinois IIRC. I have a friend who is a ‘sort of’ retired body guy in Superior Wisconsin so I hooked the two them up. As some of you know, I’m also a Porsche guy and Rick, the body guy is, I’ll say, mostly a Porsche guy. I think Rick has Keaton’s car on his Cellette bench now and is trying to get to know the details for restoring the Z. He sent me a question this morning about the finish under the rear deck. I think he needs pictures of what perfect looks like, because that is Rick - perfectionist. Mine has been repainted one time so I don’t want to represent it as what the factory did. Here is the message he sent me on the Porsche site:
  8. As it turns out, the requisite parts have been secured. Thanks for all the interest. My understanding is, we even have an extra, very nice rear bumper!
  9. Jun hang builds up entire bodies for the Z and several other cars. Check the Hagerty YouTube channel.
  10. The body shop is in Superior Wisconsin.
  11. Trying to help a guy get his lightly rear ended 240Z back to like new.
  12. I have been having intrusive thoughts about the Bosch iBooster for my brakes and an electronic AC system. My preliminary research says I need up to a 250amp alternator. I have no concept of choosing one. GM? Is the alternator in my Porsche Macan GTS daily pushing that kind of amperage? Before you start thinking he doesn’t need those things, this is kind of my brand. My 914-6 GT has all kinds of modern tech. Pic for interest…
  13. This is what I’m looking for. They are way brighter than just LED replacement bulbs.
  14. I have made the decision to go with ZStory from front to back. I have no concept of what this is worth but if you know you know what it is. Datsun Comp. The original owner of my car bought out the catalog and then sold me his car to avoid a divorce that probably happened anyway. I have ceramic coated this and wrapped it as you can see. Anyone think I should stick with Datsun Comp over ZStory?
  15. @SteveJ, I have done that. But my PCB LED lights on my 914 blow the bulb/flasher combination away. I’m looking for safety.
  16. Thanks @SteveJ but not what I’m looking for. My 914 lighting package is printed circuit boards with colored LED bulbs that replicate the function of the old bulbs but are MUCH brighter and draw less current. These cars are tiny, even compared to what is a modern small car. I want to be seen.
  17. The ones I put on my 914 were $200-$300 for all four corners. $1200 + for just the tails seems pricey… 🫣 @Yarb!
  18. Looking For a source. On my 914, I have printed circuit board front and rear turns/tails/direction lights with multiple LED’s. I have heard these are made for the Z as well. Anyone know of a source? They are much brighter on mt 914. They don’t draw as much current. Only downside is if they fail, I have to count on the source still being in business. Don’t make me have @Yarb manufacture these! You know how cranky he gets under pressure now that he is retired! 🤯😵‍💫😮🤯

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.