Zedyone_kenobi

You bring up an interesting point Carl, start from the center first, like applying vinyl decals, and work your way to the corners. Good point, and probably worth highlighting.

Perhaps I may be wrong, but isn't the E31 the head not the block? Just a nit.

Concur Arne. I just went and looked where my holes should be in my cross member. I did find two through holes, and one with a nut plate in back, but nothing regular. Arne, did you say you only bolted yours up to your lower valance panels, vs the radiator lower support. I have a little while to figure this out, as I have some POR work to do, but I am hoping by next weekend I can be bolting things back up. Plus I have the little dilemma of not having half the bolts I need. THe nut plates on the center valance and where the left and left and right valance attach to the bezel are a smaller hole than the nut plates I have going into the fender. So I need to figure out what size they are and pick up about 12. Then once I get all the valances mounted rigid, I can fit the spook. I have about a dozen soft jaws for when I make furniture I can use to hold it while I measure. I certainly appreciate your help.

THanks, I will post pics as I make progress... stay tuned, news at 11

One question, since I was in a rush, I did not have time to follow Arne's advice to do a trial fit and drill out the spook prior to paint. I sort of mocked it up, but realized there is no template for how the spook should be mounted. How far up or how far back should I mount it?

THanks! That is great info! My bumper is in really great condition, but a on ounce of prevention is worth its weight in gold right! Again, I really want to say I appreciate all the help this site has given me.

UPDATE: Today, with my relatives out of town and my little son sleeping, I managed to do some quick wrenching on the Z. I Managed to get the bumper off and the spoiler. It was, as expected easy. The tube socks on the bumper was a great idea. I forget who gave me that advice, but thanks VERY much! Now that I have all the front parts off, I am going to mix up a batch of POR-15 and hit a few minor blemishes I found that I have no intention on leaving alone. May as well, strike when the cars pants are down! Next the new valances go on and then its time to mount my new spook. Wow, its been a long road. Here is my progress... IF all this goes as well as I think it will, I may be selling my air dam.

Alas, a large portion of the car buying public, like the rest of the public has the education of a snail.

Okay, I feel better about proceding with ripping off my old spoiler and bumper. Now anybody know what size those nut plates are on the center valance? I may as well use them if I can.

great work! Kudos to getting out there and knocking out some tough love.

I recently picked up a center valance in great shape from bad dog parts to complete my spook conversion. I have the center valance, the left and right valances, and the MSA spook back from paint and I am very happy with the quality of work. I am gearing up to take off the front bumper, but I have been reading that the front valance with the captive nut plates is a rare part and may or may not fit my car? 26th-Z has been a great help on this, and he has educated me on the history of this part and the matching the corner valances that goes along with it. My corner valances do not have the captive nuts installed. Do I have a collection of parts that will not match up? I will post pictures up later tonight, but there is some pics of the center valance posted by 26th-Z below

Wow, congrats, you must be proud... Stunning results!

I think you are going to be able to find a car, but the challenge will be getting it to you. I would try EBAY on line. It will give you access to hundreds of cars. I wish you luck. One day I hope to travel to see your country.

By the way George, I was going to go that route as well. I was going to get a BRE done in clear vinyl, and put it on, so its not obvious, but in the right light you see it. Sort of like ghost flames. We will see. I have to mount the darn thing first.

THe parts are still on my workbench. I had some yard duty, but the first full day I get off, these bits are going on. I just need an extra set of hands to help out. Removing that front bumper is going to be tricky alone.

I was thinking of doing the same thing. Can you pick up that sealer at the local auto parts store?

This is awesome! I have long since thought my pertronix was a bandaid as well.. great work!

I will be taking off the front bumper this weekend to get better access to my lower air dam so I can get ready to install my lower valance panels. Is there a trick to removing the front bumper? Should I have two people there? There seems to be the 2 large bolts on each side that hold the bumper supports to the front end of the car, and then a few smaller bolts on the sides under the headlight bezels. Any advice would be appreciated.

DOH, that is a really good idea...I have not got that far yet.. I was sort of just assuming it would all fit... Body work pro, I am not. Great advice Arne.

UPDATE: The new front valance from John at Bad dog parts, was immaculate! I will be taking the parts to the paint shop on Monday along with the front spook! Good times!

how do you know its not an 'N'

it'll buff out. HAHA... patience, this is not the car your looking for.

Man, Arne, I can see it on my computer. Sorry for the confusion folks... nothing to see here... nothing to see..

Hey Zs-ondabrain, When you went with Urethane, did you notice more gear whine from your diff? Ever since I switched to urethane on my mustache bar, the gear whine is more noticeable. Or my diff just happened to start making this noise right after the install.

Just a side note, I have three build 240Z's in Forza and love how it sounds, so kudos to you!