Everything posted by NickF
-
Blown Head Gasket!!!
Have you checked the tappet clearance?? If far enough out car can behaveas described. Nick
-
2 brackets...what are they for?
Looking at the picture of the hatch I think it has been retro fitted. Notice that the flange doesn't go all the way round and the edges look a bit rough? Some one who has a later car will be able to tell. Nick
-
2 brackets...what are they for?
Unusual for an early car to have those hatches! Mines #396 and only has provision for the plastic . Nick
-
2 brackets...what are they for?
Just seen wheel brace
-
2 brackets...what are they for?
Thanks for all the pics and info guys. Are the plastic "lids"#32,#33 plastic tool boxes? and are the plastic lids for sale at dastops.com the box or the lid or the complete fitting?????? Are they for the jack and wheel brace ?? Any pictures of original tool kit. Nick
-
2 brackets...what are they for?
Thanks for that. Do the lids cover the three cut outs in that rear bulkhead??? If so what do you store in them??? Nick
-
2 brackets...what are they for?
Any one have a picture of the boxes and lids? I have the tabs but nothing else. Are they obtainable? Nick
-
Streetracing in Stockholm
What I said was that the "The Run" , the Nissan DVD for the 350 Was not a cheap exercise. Was not comparing it to the Stockholm video Nick
-
Streetracing in Stockholm
The DVD of the 350Z racing on the streets of Prague was great. Theres some production value. Not a cheap exercise. Nick
-
240/260z Magazine articles
Here are a few Motor Trend Feb 1974 Car and Driver April 1974 Road and Track May 1974 Motor May 1974 Autocar August 1974 Heres a couple of Australian ones Motor Manual June 1974 Sports Car World June 1974 This sould keep you busy at swap meets. Nick
-
chassis number
Steve Have you posted your results, information? If so where, would like to have a look. Nick
-
Tell Me Yours I Want To Know
Steve HS30-00396 L24 024983 2-71 Drysdale Victoria Restoration to start????? Nick
-
Black... or gold?
Lachlan. Are you getting the wheels in Australia? or importing? Nick
-
After the car was resprayed.
Use 1200 wet and dry, if a new sheet is used rub the paper on its self to dull also rub soap on the paper, this reduces the cutting. When you have got rid of the orange peel use cutting compound and a soft cloth buff with a clean cloth then repeat with metalpolish Brasso is good. The finer the abrasive the better the finish. Hard work but you can obtain a great finish. Much easier hire a polisher I think they run between 900/1100 RPM flat down with worn 600 , use the compound with the polisher then use compound/metal polish. Be careful with the reds/oranges as they seem to "burn" easier than some colours. Nick
-
H4 headlight replacement
If you fit the halogen bulbs it is a good idea to fit a couple of relays (5pin) one for high beam and one for low. Nick
-
Lowering Suspension
Are the struts shorten? Nick
-
Period Carbs
Best triple set up? Would like carbs avaliable in early 70's Any suggestions? Nick
-
Lowering Suspension
Whats the best way. Want to use 15x7 inch rims and no body mods. Nick
-
Steering Wheel Spoke Colour.
Are the earlier steering wheel spokes without the cut outs silver? Nick
-
Interior Ergonomics
Alan. Nissan would have realised the export potential of the Z, it would have been designed for the world market, may be not as well designed as it should have been,the hand brake for instance. But that did'nt seem to bother many thousands of Americans who could'nt get enough of them may be design genius?? Were Zs exported to USA before UK? the natural export market? Credit where it is due they built a car that sold very well in the market that it was intended for. Pity the UK motor industry was still trying to sell some pretty average product in the 1970s Nick
-
Watanabes in Australia??
Think I'll stick with the superlites can get them powder coated and nearly get a set for the price of 1 Watanabes. Thanks for the help Nick
-
Watanabes in Australia??
Possible to get these rims in Aus?? Similar to superlites? Nick
-
Rotisserie wanted
Any Australians got rotisserie for sale?loan (long term) hire Have plans to make but if can buy /borrow so much easier. Nick
-
which carbs?
Which carbs for period restoration/modification? Want 200bhp Road/track? Weber 40's ? or? Any ideas Nick
-
To Do List 2003
Start restoration. Would be nice to finish. 12 months? Long enough????