Leaderboard

How long ago did I mention brake booster???? If the booster is bad the master cylinder is probably leaking too...

So maybe a kick-starter is needed or perhaps someone has a used/new pedal laying around...and no more crocs when driving. Ever.

They're a little further down than I remembered but you'll get the idea.

Sites idea with the grip tape sounds like a good cheap fix. I have a spin off on it. An alternative would be a piece of "emery cloth" and a small tube of glue. Most hardware stores will sell it off the roll. Its an inch wide, about 5 inches long would be enough. Ask them for a suitable glue to glue it to rubber. Use the emery cloth to rough up the rubber so the glue will bond better. Then cut the emery cloth to size and glue it on drit side up. Probably 60 or 80 grit would do the job. I would use emery cloth, not emery paper.

The corners wear off and they do get slippery. I don't know who runs zcardepot but he sure is covering the bases on z car needs. Here's some new rubber for a decent price - https://zcardepot.com/interior/pedal-pads/clutch-and-brake-pedal-pad-set-oem-300.html It's a stretch fit. No special tools required.

Or you could put a couple of zip ties around the rubber and position the square part of the zip tie on the face of the pedal. I did that to hold the worn rubber on my pickups clutch pedal and got that as a surprise result. I can post I picture tomorrow for you to see what I'm talking about. Cheap fix!

We called it "grip tape" in my skateboarding days but now I'll say stair or step non-slip tape. Sandpaper like with sticky adhesive on back. You've seen it at restaurants on their steps. Probably get it at Lowes? That's all I can think of.