ennisdavis Posted May 28, 2022 Share #1 Posted May 28, 2022 Does anyone make the engine compartment liners that close off the frame rails? Link to comment Share on other sites More sharing options...
Namerow Posted May 29, 2022 Share #2 Posted May 29, 2022 I'm not aware of any vendor that offers an inner fender panel replacement (whether complete, or just the bottom strip). If the rot on your car hasn't travelled too far up from the frame rail seam, the panel is pretty straight from front to rear and it shouldn't be too difficult to graft in new metal cut from flat sheet (20 gauge, IIRC). A CZCC member from Calgary, Alberta (name?) posted a detailed build about 2 years ago that illustrated this repair quite nicely. Link to comment Share on other sites More sharing options...
CanTechZ Posted May 29, 2022 Share #3 Posted May 29, 2022 KF Vintage JDM has them for the 240Z, they go up to just below the shock towers. I'm not sure how close they are to the 280Z but might be a starting point. I purchased a pair to use on my resto. They can be purchased individually. 1 Link to comment Share on other sites More sharing options...
ennisdavis Posted May 29, 2022 Author Share #4 Posted May 29, 2022 Wonder how different 240 and 280 sheet metal is. There are alot of 240 parts. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now