Got two rolls of this

and some of this

Wich will be installed before the new carpet comes in

So, after removing surface rust. Rust treatment, primer and new paint.

 

 

Wow, you do good work.

PMG

While the interior paint was drying, I did some suspension work. So I removed the front axle, engine crossmember and steering to refresh some parts:


Oh and I did pretty much the same for the rear:


After the paint had dried I started rebuilding the interior layer by layer.
Sound deadening:

Some more insulation and some new vinyl from MSA:


Oh and I rebuilt the drivers side door with a brand spanking new NOS door card

Oh and I rebuilt the drivers side door with a brand spanking new NOS door card

 

Where did you get the NOS door skins?  I need some...

Mike Interior Innovations can make them, just send them an email and ask. I'm looking at ordering new leather interior that all matches. Also, topgaiters on ebay offer leather doorskins.

Mike Interior Innovations can make them, just send them an email and ask. I'm looking at ordering new leather interior that all matches. Also, topgaiters on ebay offer leather doorskins.

 

 

Would love to see pics of leather doorskins from Interior Innovations...

Wheee! PM with your email address and I'll forward the message with pictures to you. I'm computer illiterate don't know how to link pictures and text.

Thanks for all the info Steve!

Nomuken,

 

Nice Car.  Do you mind if I ask what size tires/rims you have?   Also what brand exhaust? 

 

Thanks

Gary

Hi

so in chronological order:

- I bought/won the doorskins from yahoo japan. Approx 230$ without shipping.

- wheels are konig rewinds, 14x7 offset -9

- tires are yokohama 195/65/14

- exhaust is a monza/pacesetter backbox and a straight pipe to the pacesetter header

So, progress is a bit slower these last days, but I done some of the boring and time consuming stuff, like changing all the heater hoses, greasing choke cables, sorting and removing all sorts of wires from all the previous owners (what a mess). Redid a blower motor loom as mine was butchered,...

I also changed the inner glovebox for a new part from MSA. I really think this part was never meant to be changed without removing the dash, what a PITA!

Some refreshening of the blower motor:

 

Same for the steering:

 

Replaced this leaky bastard:

 

And my BC Racings showed up. Welded them to the spindles already. New balljoints and tie rods are in to. And all 8 wheel bearings will be replaced, I prepare myself for a day full of pain and shouting with the hammer, press,...