Original Genuine Nissan Fan Clutch and blade / Water Temp sensor sender - Open Discussions - Classic Z Car Club Skip to content

Original Genuine Nissan Fan Clutch and blade / Water Temp sensor sender

Featured Replies

I want to replace the following parts in my 1972 240z:

- Water Temperature Sender Kit with retainer nut

-Water Pump

-Fan Clutch with plastic blade

-Fan Belt

-Water Pump Bolt Kit

I normally purchase my parts from Black Dragon Auto but after contacting them i have been informed their parts are aftermaket parts. I tried MSA but its a hassle with them and prices are quite steep. For these quality genuine nissan parts where should i go?

Do you have the link for the online catalogue? If so, look up your part numbers and then check with Courtesy Nissan Parts - courtesyparts.com to see if the part numbers are still available. Enter the p/n in the search box to check. if not, you may have to be satisfied with aftermarket items.

You don't say what your problem with MSA is but I've had nothing but good experience and excellent customer service from them. Many of their items are actually genuine Nissan parts and you can expect some markup for their profitability.

  • Author

I have sent 2 e-mails to Courtesy parts and have not yet received any reply regarding these parts. Do i really need to purchase original genuine Nissan Parts or will i be alright buying aftermarket for this cooling section of the car?

S
Sponsored
Advertisement
Go Ad-Free
No ad showing? Ads help support ClassicZcars. If you use an ad blocker, please consider allowing ads on this site or Go Ad-Free.

Most likely stamped. I got what might have been the last cast one from Courtesy last year.

Yep, that's cast. Cheap water pumps usually have a thin stamped impeller like this:

post-21373-14150828141663_thumb.jpg

They tend to wear out quicker, so I've heard.

S
Sponsored
Advertisement
Go Ad-Free
No ad showing? Ads help support ClassicZcars. If you use an ad blocker, please consider allowing ads on this site or Go Ad-Free.

Sometimes the image on the website is not what you get, and sometimes they tell that somewhere on the site. Not sure why the stamped impeller would wear out faster, since it's usually a leaky seal followed by bearing failure. Certainly the cast impeller has nicer blades on it.

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.