did the logical search , but no luck......my hand brake cable is fine, the problem seems to be the two rods connection on the center hand brake assembly came loose. I have a Black Dragon catalog and don't see the rods ,these rods both ends have threads and somehow screw to the assembly, HELP,,,,,any tips will be welcome,,,,,,

Edited September 11, 201213 yr by 72 OJ

Dismantle, evaluate, and make new parts as required.

I may have one on a '78 parts car... You have been Power Sliding with the LS1 haven't you??

I may have one on a '78 parts car... You have been Power Sliding with the LS1 haven't you??

please PM with part info..................I do a little sliding

IT SNAPPED OFF, BROKE LOOSE, the threads on each ends of the rods are clean

Look, what a nice CORVETTE E-brake handle

black gold man,,,,,is not the handle :classic:

, is the connecting rods on the Z stock cable rear/emergency/parking brake assembly, that somehow snapped off ....any tips welcome,I need to remedy this ASAP since I have a steep driveway where she sleeps

There are two rods for the ebrake - a long one from the ebrake handle, a short one for the cable yoke. Did you bust both or just one? Any pick-a-parts in your area? This will not be a typical aftermarket item, may still be available from Nissan.

There are two rods for the ebrake - a long one from the ebrake handle, a short one for the cable yoke. Did you bust both or just one? Any pick-a-parts in your area? This will not be a typical aftermarket item, may still be available from Nissan.

[ATTACH=CONFIG]56248[/ATTACH]

Yep,both are snapped from the assembly,after looking at your picture seems that my assembly came apart/broke or got unglued ...I will check the assembly to see if parts are broken or missing, do you have pic on how it looks when in proper working order,,,,,thanks

This might be of some help, too.

Arne, thanks, yep my E brake assembly came apart,there are parts that vanished according to this diagram, I have a catalog from Black Dragon and I think they have the bits I need, any suggestions ?

morning bump............I am thinking in a ''mickey mouse fix'', use a spare clutch/brake cable from my Vespa, cut it to size, put it in the cable yolk and secure it to the handle , the Vespa cable has adjusters at both ends,what do you think

Edited September 12, 201213 yr by 72 OJ