275/40/17 tires with ZG flares and stock suspension?

[Zs-ondabrain]

Thanks, I try.

Here's some documentation on the grill.... Post Number 6.

http://www.classiczcars.com/forums/showthread.php?t=28773

I used 1/8" x 3/4" aluminum slats, cut at the desired width of the front, V notched to bend at the right angle, and held together with C shaped aluminum stock. Cut slits to hold each fin, then drill holes in each to slide a bolt thru to hold it all together. Then custom brackets to hold the grill to the stock mounting points.

Similar to the OEM grills

Dave