thanks for your time, i'd love a copy as well.

mtdripo@yahoo.com

dan

I'd like one too gavindoolan@optusnet.com.au

if you like I'll host it at viczcar.com and anyone can download it then

Those instructions would be a good thing to put in the archives or donload section.

they are well done, and full of info.

Thanks for sending them out,

Will

Hey Will , I sent Mike a copy as well, and offered that suggestion, Gavin that also sounds like a great ideal, Good luck guys

http://www.viczcar.com/Technical/Dizzy/elecdiz240z.pdf

just incase it's not uploaded to Classiczcars.com here it is courtesy of VicZcar enjoy!

i would love to have a copy to troubleshoot my '70 tach wired to a zx distributor. Thanks!!

emccallum@emeraldis.com

http://www.pertronix.com/home.htm

http://www.carshopinc.com/product_info.php/products_id/80/1761

Check our these sites. At the Pertronix site check out the ignition kit link. My local Z shop is installing these into OEM 240Z distributors, while maintaining the original exterior appearance (i.e., you don't even know the car has electronic igniton). I'm told none have come back with problems.

My local Z shop is installing these into OEM 240Z distributors, while maintaining the original exterior appearance (i.e., you don't even know the car has electronic igniton).

Except for the electric wires going to the ignition that wouldn't otherwise be there at all.

We've been doing this for years. No need to go to a shop for it to be done. http://www.classiczcars.com/forums/showthread.php?t=10538

The two wires for the pertronix ignitor are easily routed along the original wires and hidden. Much less obvious than a Crane (POS) system, or the ZX Upgrade Dist.

texasz, don't be a party-pooper.

texasz, don't be a party-pooper.

Sorry just pointing out what will be noticed by any Z fan at a show or when pix of the car are shown around.

IF ITS STILL AVAILABLE I WOULD APPRECIATE A COPY SENT TO ME.

THYLAND@SATX.RR.COM

THANK YOU IN ADVANCE