preith
-
Posts
403 -
Joined
-
Last visited
preith's Achievements
-
I have an early 260 door you can have cheap. The outer skin is good but as with most doors the bottom seam is not optimal. Can snap some pics for you, PM me if interested.
-
View Advert Weber DGV carbs Pulled this off a project car. The car has not run in some time, I have not cracked them open but they do look to be in good shape. Will trade for some ratty, rusty [with busted plastic ends] but complete, SU throttle linkage, complete from firewall to carbs. Advertiser preith Date 07/01/2023 Price $100 Category Parts for Sale
-
THIS ADVERT HAS EXPIRED!
- FOR SALE
- USED
Pulled this off a project car. The car has not run in some time, I have not cracked them open but they do look to be in good shape. Throttle and choke cables included. Will trade for some ratty, rusty [with busted plastic ends] but complete, SU throttle linkage, complete from firewall to carbs.$100
Pewaukee, Wisconsin
-
View Advert Non vented BRE style spoiler Pulled this off a project car. Has been repaired, but said repair does look like it was done well. Will trade for some ratty, rusty [with busted plastic ends] but complete, SU throttle linkage, complete from firewall to carbs. Advertiser preith Date 07/01/2023 Price $50 Category Parts for Sale
-
THIS ADVERT HAS EXPIRED!
- FOR SALE
- USED
Pulled this off a project car. Has been repaired, but said repair does look like it was done well. Will trade for some ratty, rusty [with busted plastic ends] but complete, SU throttle linkage, complete from firewall to carbs.$50
Pewaukee, Wisconsin
-
View Advert 14x6 Western Turbine Wheels, 0 offset Pulled these off a project car. Wanted to see if anyone is interested in them before I take 'em to the scrapper. They would probably clean up pretty good with some sandblasting/glass media blasting. Will trade for some ratty, rusty [with busted plastic ends] but complete, SU throttle linkage, complete from firewall to carbs. Advertiser preith Date 07/01/2023 Price $100 Category Parts for Sale
-
This advert is COMPLETED!
- FOR SALE
- USED
Pulled these off a project car. Wanted to see if anyone is interested in them before I take 'em to the scrapper. They would probably clean up pretty good with some sandblasting/glass media blasting. Will trade for some ratty, rusty [with busted plastic ends] but complete, SU throttle linkage, complete from firewall to carbs.$100
Pewaukee, Wisconsin
-
THIS ADVERT HAS EXPIRED!
- WANTED
- USED
Hoping to avoid purchasing one new, wondering if anyone has one they're willing to part with.NO VALUE SPECIFIED
-
View Advert R200 Mustache Bar Wanted Hoping to avoid purchasing one new, wondering if anyone has one they're willing to part with. Advertiser preith Date 06/02/2023 Price Category Parts Wanted Year 1975 Model 280z
-
View Advert LD28 Crank Wanted Yes, it's a long shot, but any leads (including sale links) for an LD crank would be very much appreciated. Advertiser preith Date 04/21/2023 Price Category Parts Wanted Year 0 Model Diesel
-
THIS ADVERT HAS EXPIRED!
- WANTED
- USED
Yes, it's a long shot, but any leads (including sale links) for an LD crank would be very much appreciated.NO VALUE SPECIFIED
-
Hello, late to the party but curious if anyone has some second hand info on the Moroso oil pan? This looks VERY close to the Nissan Comp one I had at one time, and it was around the same price circa 2000.... p/n 20976 https://www.moroso.com/oil-pan-datsun-nissan-l24-l26-l28-road-race-baffled20976/ EDIT/UPDATE: I reached out to Moroso, this is currently out of stock but will be available later this month or early the next.
-
Hello, long time no talk on this forum, dragging up a thread from the dead, even though my original pic is no longer visible, thought I'd post this car is now for sale: can be found here: https://hsrrace.com/classifieds/
-
Ouch!! Glad you made it out ok, thanks for sharing. Similar experience myself, not going as fast, but LF suspension failure, happened right as I nailed the brakes, tire rolled under the fender and immediately took me off the track driver's left (right hand turn approaching), on dry grass it seemingly did not slow down one bit... the worst feeling knowing you're just a passenger at that point. Didn't go airborne but went into an embankment. I had additional front bracing and the chassis was ok for the most part. Sore shoulders from the belts but that was it. The ego was bruised more than anything. Anyway the experience really cemented that the car could easily be a write off at any time.
-
Thanks, but just to clarify, some people might look at that link and wonder WTF we're doing, what I was really after is this, p/n 40-4185-075 in particular: http://ubmachine.com/balljointspins.html Which enables the use of a relatively common spherical bearing & housing, like these: http://ubmachine.com/monoballhousings.html May not be worth mentioning, but if there's enough room (depending on the brakes there most likely isn't on the s-30), you can also go with a "screw in" style ball joint with a threaded sleeve: http://www.speedwaymotors.com/Steel-Upper-Ball-Joint-Sleeve-K772-Style,2126.html http://www.speedwaymotors.com/Howe-Racing-22320S-1968-89-Chrysler-K772-Style-Upper-Ball-Joint-Steel,7935.html Also, to further complicate matters, it appears the K6024 ball joints have changed dimensions over the years, now requiring a taper ream to retrofit on an older truck for which it's originally intended. So if someone were to pick up an OEM unit off an old Chevy to compare, or perhaps the one linked above, they'd probably be more confused, see notes: http://www.speedwaymotors.com/Speedway-1963-71-Truck-K6024-Style-Upper-Ball-Joint,2245.html
