Bambikiller240

:bandit: This one is of Bill Clinton's Dog!

I hope this one comes through!

Alex: You can get it almost anywhere that car stuff is sold. Everywhere from Grand Auto, to Checker/Shucks/Kragen, Poop Boys, Ace Hardware, etc. It's usualy found near the Permatex products, hanging from a hook in a blister/card package. HAND (Have A Nice Day) Carl

While the name "Classic Z Club" and expanding our focus to include 260/280Z's may have some benefit. I prefer to retain the original 240Z specific focus. Of course, that may be due to my complete lack of interest in 280Z's. While there are outward similarities between the 240 & 280, there are many significant differences under the sheetmetal. Just my $.02 Carl

I'm guessing carbs with Nitrous injection. POWER!

Wow, I can't believe that the cover went for over $100 on eBay! Back in the day (1979) when I was building my first (and still favorite, though sold long ago) Z car, the Datsun Dealer in Fremont CA had a shopping cart by the parts counter FILLED with these covers, and original AM radios & AM/FM stereos that had been removed from new Zcars when aftermarket AM/FM/Cassette units were added to pad the sale price. If you bought $50 worth of parts you could have any one item from the cart. I still have two of these luggage covers in boxes collecting dust in the garage. Guess they were worth having after all!

Geez Mikey, you really scored on this deal!! A complete rustless 280Z for next to nothing! You must be living right! Of course, you realize this will further delay the 240 project by at least a year. Congrats!

Once used it to keep my girlfriend in her seat. Does that count?

Jerry: Know what you mean about time (and age). Two years ago I got back into Z's after a 15 year absense & I'm still re-learning things that I already knew! The play in the inner tie-rods can be measured, but it's a PITA and most folks will just bite the bullet and replace them rather than spend the time mucking about with feeler guages etc. They don't cost too much. Another possibility that I've heard can cause the problem that you describe is "slightly" ovalled mount holes in mag wheels. I haven't experienced that, but there was a thread on the IZCC list about that a few months ago. Did you replace Ball-joints and outer tierods when you installed the PU bushings? They can cause the wobbles you describe too. The front-end is a simple system, but I've been told that EVERY part must be well within spec for the system to function smoothly and safely. Your idea about borrowing some "known smooth riding tires & wheels" sounds like a good place to start. If that didn't fix it, I'd do the outer tierods and ball joints next, then the inner tie rods if necessary. I have PU bushing throughout on my 72 Z and I haven't had the symptom that you describe, although I can feel very minor cracks etc in the road much more so than with the rubber bushings. I replaced all wear items in the front-end when I bought my current Z. Carl

Jerry: Your post doesn't say, but I'm wondering if you have a "stock" front valence on the car. Many early Z's experienced wandering at high speed due to a lack of downforce at the front-end. The solution was the "Spook" or "Air Dam" added to the front of these cars. Another possibility is worn inner tie-rods (inside the steering rack). Also wondering if your tires were static balanced or spin balanced. If you installed the PU bushings correctly (and it's hard to mess this up) they should not cause this problem. You MAY feel the shimmy more due to the compliance of the bushings, but they should not CAUSE it. Have you switched the rear tires/wheels to the front & checked for any differnce in symptoms?

How about coil-overs? I don't know of any standard springs available for a Z that do not lower the car, except for bone-stock Nissan springs. Even the European Nissan springs lower the car some, and they are not very much stiffer that US spec Z springs. Maybe you could put another bump stopper around the strut, inside the coil spring to stop the compression before the tires hit the wheel-wells. Good Luck!

You will find that the gas tanks on later 280Z's (from around 76/77 on up will not fit in a 240Z. This is because the later cars had the small spare tire and the extra space was used for the gas tank. The ealier the tank you find, the more likely it will be to fit in a 240Z. FWIW,

Hey Tim: I bought a set from ZTherapy.com & they are both the same, but Scott sent instructions and some washers to use one a a short. Try to contact Scott and ask him for sure, but I seem to rember tha the short went on the rear carb. I'll try to find the instructions to confirm (if I still have them.) ------------------ Carl Stahlnecker 72 240Z "Bambikiller" cstahlnecker@hotmail.com bambikiller240@altavista.com

I read it. FYI most of the active members of 240Z.org don't visit the site too often. We communicate with each other via the E-mail List. Try joining us (click on button on right side of home page) either as a regular member or to the "digest" version. You'll probably get quicker, and more info. Just my $.02 ------------------ Carl Stahlnecker 72 240Z "Bambikiller" cstahlnecker@hotmail.com bambikiller240@altavista.com

Courtesy Nissan in Texas has a website & offers 25% discount on Nissan parts to members of Zhome.com. Membership at ZHome is FREE, so check it and Courtesy Nissan out! Sorry I can't remember their URL. Do a search, it should come up easy! ------------------ Carl Stahlnecker 72 240Z "Bambikiller" cstahlnecker@hotmail.com bambikiller240@altavista.com

frenchy13: It is possible to straighten a Z frame, but as with all frame straightening....it is EXPENSIVE!!! Un less the car is perfect in all other areas (ie NO rust, perfect interior and mechanicals, it is probably not worth the time & $$ to fix it. For $400 it sounds like a better choice would be to buy it & use the parts to make a sound STRAIGHT framed Z into a perfect one. Of course, opinions vary, but this is mine. Good luck. ------------------ Carl Stahlnecker 72 240Z "Bambikiller" cstahlnecker@hotmail.com bambikiller240@altavista.com

I assume that you are refering to the switch on a 73 240Z guessing from your name. The backup light switch is located on the passenger side of the 4-speed manual transmission. It connects to two wires with bullet connectors. It is kinda near the filler plug. HTH, ------------------ Carl Stahlnecker 72 240Z "Bambikiller" cstahlnecker@hotmail.com bambikiller240@altavista.com

How about trying the "For Sale" Forum of 240Z.org??? You're almost there if you got here! ------------------ Carl Stahlnecker 72 240Z "Bambikiller" cstahlnecker@hotmail.com bambikiller240@altavista.com

I mounted mine on the passenger side of the center console. Positioned far enough forward to not be hit by Knees, and "up" enough for driver to reach. Works well. AIR, the antenna switch on my first Z was in the face plate of the radio, but when taking the radio out of the car, I seem to recall that the switch was mounted to the outside of the radio case with a screw.(behind the faceplate). ------------------ Carl Stahlnecker 72 240Z "Bambikiller" HLS30-55703 11/71 cstahlnecker@hotmail.com bambikiller240@altavista.com

Rust doesn't go away by itself. How much of the repair work can you do? How much would need to be farmed out($)? How extensive is the rust in the locations you see? Are you sure you have seen it all? or do you just want to drive it into the ground as is? The answers to these questions will get you further down the road to a decision. It all depends on your skills, desires, & plans for the car. FWIW, ------------------ Carl Stahlnecker 72 240Z "Bambikiller" HLS30-55703 11/71 cstahlnecker@hotmail.com bambikiller240@altavista.com

Timberwolf: Hi, I'm not the Carl you wrote to, but I'm wondering if you have reduced the fuel pressure from what was required for the EFI? The SU's won't like the fuel pressure required for EFI. Just a thought. Good Luck on a Fix. ------------------ Carl Stahlnecker 72 240Z "Bambikiller" HLS30-55703 11/71 cstahlnecker@hotmail.com bambikiller240@altavista.com

Seymourccc: I can't tell you much, but I do know that there are at least several ways to install the SBC's in a Z. The old ways like "Johns Cars kit" or the "Scarab" way puts the engine way to far forward to get good weight distribution and leave the car with poor balance and handling that is nearly impossible to remedy. The prefered way is the newer "Jags that Run" design which I'm told puts the engine right at the firewall, but results in near perfect 50/50 weight distribution. Don't know which way your car is built but I'm sure you will get resonses from others who can advise you further. Good Luck, ------------------ Carl Stahlnecker 72 240Z "Bambikiller" HLS30-55703 11/71 cstahlnecker@hotmail.com bambikiller240@altavista.com

Atomrat: I can't answer the specific questions you asked, but I can tell you that the linkage for the round top carbs is different from the stuff you got on the flat-tops. You'll need to get linkage as well as carbs is what I'm saying. Good Luck ------------------ Carl Stahlnecker 72 240Z "Bambikiller" HLS30-55703 11/71 cstahlnecker@hotmail.com bambikiller240@altavista.com

Question answered! [This message has been edited by Carl (edited 08-22-2000).]

Don't know about any adjustments, but most of the "20" horsepower he's talking about was already there, but was being used to spin that stupid smog pump instead of your tires! ------------------ Carl Stahlnecker 72 240Z "Bambikiller" HLS30-55703 11/71 cstahlnecker@hotmail.com bambikiller240@altavista.com